Speedo refurb
-
rolesyboy
- 1275 Cooper S
- Posts: 2355
- Joined: Fri Jun 25, 2010 10:57 am
- Location: Colchester, Essex
- Has thanked: 7 times
- Been thanked: 6 times
Speedo refurb
I am slowly dismantling/rebuilding various parts of my Mk1 Cooper and fancy having a go at cheering up my clocks. Is it a wise move. Are there any parts which I need to be careful with? Is there any parts that conribute to the speedo needle bouncing at steady speeds? Any advice appreciated. Cheers. Mark
Rolesyboy
-
woodypup59
- 1275 Cooper S
- Posts: 1555
- Joined: Thu Jun 24, 2010 5:28 pm
- Location: London UK
- Has thanked: 5 times
- Been thanked: 21 times
Re: Speedo refurb
Often its due to less-than-perfect routing of the cable.
Bad enough to achieve with a single carb, even worse with twins.
Bad enough to achieve with a single carb, even worse with twins.