Page 21 of 31

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Sun Sep 26, 2021 3:08 pm
by Pandora
That is looking amazing! and the lines are so sharp I'd be really tempted to go for a darker 'Rob Walker' Blue (but I know Surf has been the plan from the start)

Al

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Sun Sep 26, 2021 3:34 pm
by InnoCooperExport
Simply wonderful Doc, I think everyone on here is almost as excited as you are about seeing that Surfblue coming on soon!

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Sun Sep 26, 2021 6:42 pm
by hanlminiman
Bootiful!

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Mon Sep 27, 2021 8:15 am
by UHR850
8-) Her body lines are fabulous, she is already a beauty by now.

Kees.

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Mon Sep 27, 2021 10:16 am
by roger mcnab
hi doc well this project is going to look great in the final color even better than it is now in primer it is a credit to you to have achieved this result and not in grp good one
cheers roger mcnab :D

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Sun Oct 03, 2021 5:02 pm
by Dr.Mabo
Thanks again for all your motivating response. :D :D

Moving on to the drivetrain. Nothing really out of the ordinary, but a careful gearbox overhaul has to be done, of course, to get the engine power properly on the road. So check, measure, inspect, replace and carefully reassemble everything. A 4 Syncro remote gearbox with 3.44 final drive ratio is used.

IMG_7137.jpg
IMG_7145.jpg
IMG_7166.jpg
IMG_7171.jpg
IMG_7175.jpg

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Sun Oct 10, 2021 2:25 pm
by Dr.Mabo
While the body is getting its coat of paint, the engine and attachments should also be able to shine accordingly. Since I am not a fan of painted screw heads and seals, I just stuck all the parts together for painting. This saves me from having to mask the parts and they are only painted where they are visible from the outside. Only the gearbox is a bit tricky. So I first painted the gearbox from underneath, then I put the engine block on top of it and painted the whole engine.

IMG_7185.jpg
IMG_7209.jpg
IMG_7216.jpg
IMG_7188.jpg
IMG_7221.jpg

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Sun Oct 10, 2021 4:53 pm
by Peter Laidler
In 1966 or 67 there was a competition in one of the mini magazines where you could win a Broadspeed GT Mini. I think that the prize was a maroon one. I entered the competition and convinced myself that I was going to be the winner. I even had a Broadspeed GT picture on my wall. Sadly, another million other mini cooper fans also entered and thought that they would win too. Nope....., I didn't win but that's why have been a fan of them ever since.

Does anyone else remember the details of the magazine and the competition?

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Mon Oct 11, 2021 8:13 am
by UHR850
Dr.Mabo wrote: Sun Oct 10, 2021 2:25 pm While the body is getting its coat of paint, the engine and attachments should also be able to shine accordingly. Since I am not a fan of painted screw heads and seals, I just stuck all the parts together for painting. This saves me from having to mask the parts and they are only painted where they are visible from the outside. Only the gearbox is a bit tricky. So I first painted the gearbox from underneath, then I put the engine block on top of it and painted the whole engine.


IMG_7185.jpgIMG_7209.jpgIMG_7216.jpgIMG_7188.jpgIMG_7221.jpg
What kind of paint colour number did you use.

Kees.

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Mon Oct 11, 2021 8:32 am
by UHR850
:roll: https://www.motorsportmagazine.com/arch ... -are-doing

No price competition story but a very well read.

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Mon Oct 11, 2021 9:29 am
by roger mcnab
hi doc that is one hell of a strong cardboard box sitting under the engine and gearbox our ozzie ones would have collapsed at the thought of doing that
good color but is it the usual bmc green or is it a lighter shade
cheers roger mcnab :D

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Mon Oct 11, 2021 10:05 am
by Dr.Mabo
UHR850 wrote: Mon Oct 11, 2021 8:13 am
What kind of paint colour number did you use.

Kees.
I use Middle Bronze Green BS223.

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Mon Oct 11, 2021 10:15 am
by Dr.Mabo
roger mcnab wrote: Mon Oct 11, 2021 9:29 am hi doc that is one hell of a strong cardboard box sitting under the engine and gearbox our ozzie ones would have collapsed at the thought of doing that
good color but is it the usual bmc green or is it a lighter shade
cheers roger mcnab :D
I must admit, the box was full :D But indeed the box was strong too.

As mentioned the color is Mid Bronze Green, or whatever my paint shop has mixed according the British Standard Code BS223. But its also a mater of how the photo was taken. Check the differences of the shade of the up side down gearbox and the engine in bright sunlight. And on digital photos I can later shift the color temperature to every tone or shade I want. So never trust a digital photo on a computer screen. :mrgreen:

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Mon Oct 11, 2021 12:15 pm
by UHR850
Dr.Mabo wrote: Mon Oct 11, 2021 10:05 am
UHR850 wrote: Mon Oct 11, 2021 8:13 am
What kind of paint colour number did you use.

Kees.
I use Middle Bronze Green BS223.
Thanks Doc :D

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Sun Oct 24, 2021 12:57 pm
by Dr.Mabo
There was no news last week, as I treated myself to a week's holiday on and near the water.

But now the paintjob is finished. The only thing missing is the white stripe across the bonnet. This will be painted on when the bonnet is finally mounted and exactly aligned. Now I'll just let the pictures speak for themselves :D :D :D :D :D :D :D

71ea7345-a82d-4ee2-9bb4-d4062c407400 2.jpg
99bda33a-c299-4514-a02f-27b23996877f 2.jpg
3G8A0521.jpg
3G8A0519.jpg
3G8A0524.jpg

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Sun Oct 24, 2021 1:34 pm
by Fanfaniracing
Yeah Baby! Finally!

It's looking soooo good! 8-)

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Sun Oct 24, 2021 2:36 pm
by Peter Laidler
There are no words Herr Doktor Mabo.

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Sun Oct 24, 2021 3:50 pm
by UHR850
:o Great :D

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Sun Oct 24, 2021 3:55 pm
by java gt
That looks out of this world Doc,nothing beats a newly painted bare shell.

Re: Time lapse full metal Broadspeed GT restoration/transformation

Posted: Sun Oct 24, 2021 4:12 pm
by jayare
That looks absolutely fantastic!

JR