Page 3 of 3

Re: Mini baby mk1 1967

Posted: Mon Mar 04, 2013 5:47 pm
by Charlynsane
Some news:

wc200 are fitted:

Image

Uploaded with ImageShack.us

Image

Uploaded with ImageShack.us

Image

Uploaded with ImageShack.us


I have also stuck the original sticker for the coil..

I think, the car is now finished!!

Re: Mini baby mk1 1967

Posted: Mon Mar 04, 2013 8:50 pm
by cpr1
wc200 are fitted:

nice ht leads you have there Charlynsane. ;)

Re: Mini baby mk1 1967

Posted: Mon Mar 04, 2013 9:40 pm
by Charlynsane
thanks you for your kindness Raymond!!

They are perfect!!

I'm still looking for nicer seatbelts eventhough she has the original ones!

I'm looking for Kangol or Britax

Re: Mini baby mk1 1967

Posted: Sun Feb 16, 2014 1:19 pm
by Charlynsane
Hello guys!

Some news of my little car!

Today the weather is sunny! let's ride!

Image

Image

Another news

I finally found the return spring anchor for my HS2! It's NOS thank to "union-jack"

I sprayed it with black epoxy and fitted it!

I think the car is now finished!

Image

Image

Re: Mini baby mk1 1967

Posted: Thu Jul 17, 2014 3:30 pm
by Charlynsane
Hello guys!

Summer is coming I'm worked a little bit on my old Lady

I finally found a perfect cavity wax spray gun!!

It goes everywhere! trough the vents of the sills and everywhere!

Image

Image

Image

Image

I also retrimed the wheel arch cover that where cracked!!
Image

Image

It looks better in reality.. it's yellow because of the flash of my phone

I'm also looking for a seat cover..

I searching for 2 years but it seems to be very difficult to find this!

Image

I used the car 2 weeks ago,

Image

Image

What a pleasure!!

Cheers guys

Re: Mini baby mk1 1967

Posted: Sat Sep 06, 2014 12:20 pm
by Charlynsane
Some updates!

I found and fitted door edge trims!

Image

Image

Image

The car is ready to hibernate during the winter!!!

I 'm still lokking for a good front seat cover but it's difficult!

Re: Mini baby mk1 1967

Posted: Sun Sep 07, 2014 7:01 pm
by bpirie1000
Brill.... Just brill... Motivates me no end.... To the garage............

Re: Mini baby mk1 1967

Posted: Mon Sep 08, 2014 8:37 am
by mk1
That looks fantastic!

I hope that you manage to find a replacement front seat! At one time this would have been easy, but I guess that most of these seats must have been thrown out years ago. :cry:

Re: Mini baby mk1 1967

Posted: Wed Sep 10, 2014 11:01 am
by Charlynsane
Hello Guys!

Thank you for your comments!

I spend a lot of time on this car but now, I think it's finished!

I found the door edge trim at sommerformini!

I'm still looking for a front seat Mark,

I tried everywhere, but I didn't find it.. I used to avoid newton trim but, I will have to deal with it

I also tried to send a mail to Miniworks but they don't have it

I'm also looking for an original spark plug spanner, if someone has it for sale??

Re: Mini baby mk1 1967

Posted: Tue Sep 16, 2014 9:17 am
by Charlynsane
Lucas prince of darkness!!

I was driving yesterday to get my girfriend,

When suddently no flasher, no front light and the fuel gauge started to swing..


So we went to home, I started to check all the bulbs and and connectors,

One connector of the headlight was not welded properly, I welded it, the front lights were ok but the fuel gauge and the flasher was swinging..

I move just a little my brand new chinese fuse box, And finally All was working properly..

I hate electricity!!