151 block ?

Post any technical questions or queries here.
Post Reply
mk1mad
850 Super
Posts: 218
Joined: Sat Nov 13, 2010 7:29 pm
Location: northwest

151 block ?

Post by mk1mad »

i have a block with 74.5 pistons 177 rods is it a 1071 over bore and could it be relined there is not alot of meat left between bores
thanks
Top
360gts
1275 Cooper S
Posts: 3013
Joined: Sat May 24, 2014 7:12 am
Has thanked: 1 time
Been thanked: 37 times

Re: 151 block ?

Post by 360gts »

If it has the AEG151 casting on it...then it is a 1071.
Top
nick rogers
1275 Cooper S
Posts: 2226
Joined: Thu Jun 24, 2010 3:21 pm
Location: South Yorks.

Re: 151 block ?

Post by nick rogers »

Or a 970.
Top
mk1mad
850 Super
Posts: 218
Joined: Sat Nov 13, 2010 7:29 pm
Location: northwest

Re: 151 block ?

Post by mk1mad »

it also has a cross drlled crank with aeg 1053 cast into it
Top
360gts
1275 Cooper S
Posts: 3013
Joined: Sat May 24, 2014 7:12 am
Has thanked: 1 time
Been thanked: 37 times

Re: 151 block ?

Post by 360gts »

970 is AEG131.
Top
251 ENG
1275 Cooper S
Posts: 1660
Joined: Sun Jun 27, 2010 5:26 pm
Location: Warwickshire
Been thanked: 5 times

Re: 151 block ?

Post by 251 ENG »

970 crank is AEG 330 , 1071 is AEG 171 :ugeek:
Top
User avatar
Spider
1275 Cooper S
Posts: 4805
Joined: Mon May 07, 2012 6:10 am
Location: Big Red, Australia
Has thanked: 125 times
Been thanked: 34 times

Re: 151 block ?

Post by Spider »

mk1mad wrote:it also has a cross drlled crank with aeg 1053 cast into it
My records here are not complete, but according to what I do have, it appears that there wasn't a Cross Drilled Factory Crank made for the 970 or the 1071.

Can anyone confirm this?

That said, I also don't have a listing for an AEG1053 Crank either.
Top
Post Reply

Return to “Technical Talk”