Teflon buttons

Post any technical questions or queries here.
Post Reply
seandoyle
998 Cooper
Posts: 319
Joined: Sat May 24, 2014 9:37 am
Location: Epsom

Teflon buttons

Post by seandoyle »

Can anyone advise me on the use of Teflon buttons in a 998 built to rev ! Also if they are worth using, who sells them ?
Thanks
Top
User avatar
Spider
1275 Cooper S
Posts: 4805
Joined: Mon May 07, 2012 6:10 am
Location: Big Red, Australia
Has thanked: 125 times
Been thanked: 34 times

Re: Teflon buttons

Post by Spider »

Discussion only a couple of weeks ago

viewtopic.php?f=3&t=12009
Top
Chalkie

Re: Teflon buttons

Post by Chalkie »

Force racing
Top
360gts
1275 Cooper S
Posts: 3013
Joined: Sat May 24, 2014 7:12 am
Has thanked: 1 time
Been thanked: 37 times

Re: Teflon buttons

Post by 360gts »

You can buy the Teflon rods and make your own if you have access to a lathe...Teflon is available on E Bay.
Item 400722394757
Top
seandoyle
998 Cooper
Posts: 319
Joined: Sat May 24, 2014 9:37 am
Location: Epsom

Re: Teflon buttons

Post by seandoyle »

Thanks for that , the use of PTFE confused me into not looking, one of the traits of being err....Thick !
Top
Tim Harber
998 Cooper
Posts: 557
Joined: Mon Jun 28, 2010 4:15 pm
Been thanked: 12 times

Re: Teflon buttons

Post by Tim Harber »

I have a set that came from Mini Spares about ten years ago if you need
Top
Post Reply

Return to “Technical Talk”