Introduction of MK III boot lid

General Chat with an emphasis on BMC Minis & Other iconic cars of the 1960's.
Post Reply
almondgreen
1275 Cooper S
Posts: 1035
Joined: Thu Jun 24, 2010 12:32 pm
Location: germany
Been thanked: 1 time

Introduction of MK III boot lid

Post by almondgreen »

When was the MK III boot lid introduced ?
Are there MK II Minis with tihs boot lid ?
mk1
Site Admin
Posts: 19842
Joined: Thu Jun 24, 2010 11:30 am
Location: Away with the Faries
Has thanked: 2 times
Been thanked: 4 times

Re: Introduction of MK III boot lid

Post by mk1 »

It is strongly believed that some very late MK2's were indeed fitted with a MK3 bootlid from new. But Simon would be able to confirm or deny this, I am sure.
minitravellerman
1275 Cooper S
Posts: 1040
Joined: Fri Oct 08, 2010 3:57 pm
Location: Banbridge, Co Down, N. Ireland
Contact:

Re: Introduction of MK III boot lid

Post by minitravellerman »

They were indeed fitted to the very last Mk2 Coopers (not Ss). I actually had one of these bootlids on a Mini I had a good while ago.

Basically it's a standard single skinned "Mk3" type bootlid without the holes for the Mk3 number plate lamp. Instead it was drilled and had the captive nuts to fit the number plate flap.

My dad was working as a mechanic in the BMC dealership in my local town at the time and remembers that only the late 1969 and (very) early late registered 1970 998 Coopers had these fitted.

I must buy back my bootlid - a local auto jumbler has it for sale (incorrectly advertised as a Mk1 bootlid I might add!!!)
Ian Campbell
User avatar
Simon776
1275 Cooper S
Posts: 1181
Joined: Thu Jun 24, 2010 6:08 pm
Location: Shakspere's county

Re: Introduction of MK III boot lid

Post by Simon776 »

Late Mk 2 cars certainly had bootlids with the Mk 3 larger number plate pressing but still with the swinging number plate and associated captive nuts - I suspect they appeared around September 1969. They weren't on June 1969 cars but were on November ones.

These were initially double skinned but by the time the Mk 3 S appeared in April 1970 they had the open frame inside.
The power of accurate observation is commonly called cynicism by those who do not possess it.
davidnutland
998 Cooper
Posts: 631
Joined: Thu Sep 02, 2010 9:48 pm
Location: Dorset
Been thanked: 1 time

Re: Introduction of MK III boot lid

Post by davidnutland »

I had one of these with the hindged number plate on a late mk2 'S' many years ago.

David
User avatar
UHR850
1275 Cooper S
Posts: 6209
Joined: Thu Jun 24, 2010 3:26 pm
Location: Huizen the Netherlands
Been thanked: 2 times

Re: Introduction of MK III boot lid

Post by UHR850 »

I have a MKIII boot lit but with all the MKII things on it.
This came from a very late Austin Mini MKII 1000 Seven.
The 1000 badge was on the lower left side and the MKI
Seven badge was on th lower right side, above the hanging
numberplate was the MKII Austin Mini MKII badge.
I still have it so I will make a picture of it, this boot lid set up
was as far as I know for the Duch marked only. I had a singel skin.
DOWNTON Mini is what I like a lot.
Collecting 60th wooden steeringwheels.
User avatar
Toby
1275 Cooper S
Posts: 1447
Joined: Thu Jun 24, 2010 12:29 pm
Location: the Netherlands

Re: Introduction of MK III boot lid

Post by Toby »

Simon776 wrote:Late Mk 2 cars certainly had bootlids with the Mk 3 larger number plate pressing but still with the swinging number plate and associated captive nuts - I suspect they appeared around September 1969. They weren't on June 1969 cars but were on November ones.

These were initially double skinned but by the time the Mk 3 S appeared in April 1970 they had the open frame inside.
Can confirm this as I had one of the double skinned ones NOS.
T.
User avatar
alexdenevers
998 Cooper
Posts: 265
Joined: Thu Jun 24, 2010 1:51 pm
Location: Lyon, France
Contact:

Re: Introduction of MK III boot lid

Post by alexdenevers »

I've always thought double skinned MKIII boot lid were an aftermarket replacement item, as we can find nowadays.
tchémini
Basic 850
Posts: 29
Joined: Sat Nov 20, 2010 4:45 pm

Re: Introduction of MK III boot lid

Post by tchémini »

on my authi 1275-c, i have a mkIII double skinned boot lid

Image
Post Reply