General Chat with an emphasis on BMC Minis & Other iconic cars of the 1960's.
Catweazle
Basic 850
Posts: 67 Joined: Wed Jul 28, 2010 2:22 pm
Post
by Catweazle » Thu Nov 11, 2010 5:38 pm
Hello,
is the article no. for the real 1959 square hole hub cap 21A 462 ?
Thank you for help.
Best regards
Catweazle
olddad
850 Super
Posts: 115 Joined: Sun Jul 25, 2010 5:10 am
Location: Northern California
Post
by olddad » Sat Nov 13, 2010 9:47 pm
The early article is 21A156.
Changed to 21A462 at about chassis 61500.
Catweazle
Basic 850
Posts: 67 Joined: Wed Jul 28, 2010 2:22 pm
Post
by Catweazle » Sun Nov 14, 2010 8:51 pm
Hello and thank you.
Do you know if there are differences between cap A156 and A462 ?
Best regards
Catweazle
olddad
850 Super
Posts: 115 Joined: Sun Jul 25, 2010 5:10 am
Location: Northern California
Post
by olddad » Mon Nov 15, 2010 9:48 am
I can't find any difference, but I also can't find the number anywhere on the covers. I'd say they are identical but maybe some absolute '59 wheel cover expert could tell.
They are both smaller than the later covers with the rounded holes and are hard to pry off the wheels without damaging the outer edge of the cover.
Mike
850 Super
Posts: 151 Joined: Thu Jun 24, 2010 2:53 pm
Post
by Mike » Mon Nov 15, 2010 11:50 am
Easy way to remove the square hole or even oval holed hub caps without damage.
Carry a short length of 1/2" diameter rope or even a length of rag. Thread through two holes and pull hard!! No problem.