Mini baby mk1 1967

[Charlynsane]

Some news:

wc200 are fitted:



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us


I have also stuck the original sticker for the coil..

I think, the car is now finished!!

[cpr1]

wc200 are fitted:

nice ht leads you have there Charlynsane.

[Charlynsane]

thanks you for your kindness Raymond!!

They are perfect!!

I'm still looking for nicer seatbelts eventhough she has the original ones!

I'm looking for Kangol or Britax

[Charlynsane]

Hello guys!

Some news of my little car!

Today the weather is sunny! let's ride!





Another news

I finally found the return spring anchor for my HS2! It's NOS thank to "union-jack"

I sprayed it with black epoxy and fitted it!

I think the car is now finished!

[Charlynsane]

Hello guys!

Summer is coming I'm worked a little bit on my old Lady

I finally found a perfect cavity wax spray gun!!

It goes everywhere! trough the vents of the sills and everywhere!









I also retrimed the wheel arch cover that where cracked!!




It looks better in reality.. it's yellow because of the flash of my phone

I'm also looking for a seat cover..

I searching for 2 years but it seems to be very difficult to find this!



I used the car 2 weeks ago,





What a pleasure!!

Cheers guys

[Charlynsane]

Some updates!

I found and fitted door edge trims!







The car is ready to hibernate during the winter!!!

I 'm still lokking for a good front seat cover but it's difficult!

[bpirie1000]

Brill.... Just brill... Motivates me no end.... To the garage............

[mk1]

That looks fantastic!

I hope that you manage to find a replacement front seat! At one time this would have been easy, but I guess that most of these seats must have been thrown out years ago.

[Charlynsane]

Hello Guys!

Thank you for your comments!

I spend a lot of time on this car but now, I think it's finished!

I found the door edge trim at sommerformini!

I'm still looking for a front seat Mark,

I tried everywhere, but I didn't find it.. I used to avoid newton trim but, I will have to deal with it

I also tried to send a mail to Miniworks but they don't have it

I'm also looking for an original spark plug spanner, if someone has it for sale??

[Charlynsane]

Lucas prince of darkness!!

I was driving yesterday to get my girfriend,

When suddently no flasher, no front light and the fuel gauge started to swing..


So we went to home, I started to check all the bulbs and and connectors,

One connector of the headlight was not welded properly, I welded it, the front lights were ok but the fuel gauge and the flasher was swinging..

I move just a little my brand new chinese fuse box, And finally All was working properly..

I hate electricity!!