fuel tank?

Post any technical questions or queries here.
Post Reply
mattyguk1
Basic 850
Posts: 73
Joined: Fri Sep 03, 2010 7:44 pm

fuel tank?

Post by mattyguk1 »

hi all, im ready to refit the fuel tank to my 1961 mk1 project. the top pipe on the tank is for a breather i guess,the bottom is for the fuel line? theres also a brass looking bung at the bottom with a small piece of angled tube coming from it.....whats that for?
coop12g295
998 Cooper
Posts: 693
Joined: Thu Jun 24, 2010 4:31 pm
Location: Portsmouth Hants

Re: fuel tank?

Post by coop12g295 »

Its the drain and goes through a hole in the floor
mattyguk1
Basic 850
Posts: 73
Joined: Fri Sep 03, 2010 7:44 pm

Re: fuel tank?

Post by mattyguk1 »

thanks,i thought as much but would have though it would have had flats on it where as mines round?
User avatar
Toby
1275 Cooper S
Posts: 1447
Joined: Thu Jun 24, 2010 12:29 pm
Location: the Netherlands

Re: fuel tank?

Post by Toby »

This is what it ought to look like when it's not in the tank.

Image

The one you have might have the pipe broken off, like what happend to mine. And the plug was abused trying to get it undone.
T.
mattyguk1
Basic 850
Posts: 73
Joined: Fri Sep 03, 2010 7:44 pm

Re: fuel tank?

Post by mattyguk1 »

thanks,my pipe is about 5mm long and the brass has been rounded right off! where is the top breather pipe routed?
formulaphoto
Basic 850
Posts: 95
Joined: Sun Jul 04, 2010 5:28 am
Location: BC, Canada

Re: fuel tank?

Post by formulaphoto »

Anyone have tips for sealing off this drain plug? My brass pipe was mangled in my attempts to remove it, and instead of putting a new one in, I'd just like to seal the brass plug.

Cheers,
W
Warwick
Classic Car Adventures
Classic Car Tours & Rallies in Canada
http://www.classiccaradventures.com
mk1
Site Admin
Posts: 19842
Joined: Thu Jun 24, 2010 11:30 am
Location: Away with the Faries
Has thanked: 2 times
Been thanked: 4 times

Re: fuel tank?

Post by mk1 »

I have bunged a number of these up & never had any leaks. I have done it with both plastic metal & araldite, usually (but not always) screwing the remains of the bung back in afterwards. I have never suffered any ill consequences of this botch. Soldering it up would be better, but I have always been frightened of loud noises :lol:

The breather pipe goes from the spiggot on the top of the tank to the clips running down the side of the tank, these are quite obvious on the front wall of the boot.
Post Reply