1963 Mini Cooper Boot floor - template required

63minicar · Post by **63minicar** » Fri Apr 25, 2014 3:31 pm

I am restoring a 1963 mini coopr - single tank (5.5 gals) and i unfortunately don't have the wood boot floor. Can anyone help me by tracing around theirs and advising me of the ply thickness so that i can make one?

mk1mini72 · Post by **mk1mini72** » Fri Apr 25, 2014 5:31 pm

Hi, or you could just buy one from Newton Commercial?

Here is the link http://www.newtoncomm.co.uk/cars/classi ... ducts-241/

Post by **minimans** » Fri Apr 25, 2014 8:19 pm

Wow that's almost $100 for a piece of ply and carpet!! I see why the OP would want a pattern!!

Gareth Brandt · Post by **Gareth Brandt** » Sat Apr 26, 2014 5:55 am

Yeahh, but it's worth it, fits like a glove

63minicar · Post by **63minicar** » Sat Apr 26, 2014 10:36 pm

63minicar wrote:I am restoring a 1963 mini coopr - single tank (5.5 gals) and i unfortunately don't have the wood boot floor. Can anyone help me by tracing around theirs and advising me of the ply thickness so that i can make one?

Hi All - I still prefer to make one from a pattern - can anyone help?

Post by **rolesyboy** » Sun Apr 27, 2014 7:57 am

I can send you a template if it's a pre 66 single tank car. Send me a pm. Cheers. Mark

mk1-forum.net

1963 Mini Cooper Boot floor - template required

1963 Mini Cooper Boot floor - template required

Re: 1963 Mini Cooper Boot floor - template required

Re: 1963 Mini Cooper Boot floor - template required

Re: 1963 Mini Cooper Boot floor - template required

Re: 1963 Mini Cooper Boot floor - template required

Re: 1963 Mini Cooper Boot floor - template required