4852 MF On the rollers today
-
- Site Admin
- Posts: 19843
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 2 times
- Been thanked: 5 times
4852 MF On the rollers today
Well, after getting the 850 dyno'd a couple of weeks ago, the Sprint is on this morning.
I am also getting the suspension sorted out with the help of our own "Guru" & Will Ker. So at least one of my cars should go reasonably well at Blyton.
As for my mildly tuned 850, with an awe inspiring 28bhp at the wheels & single leading shoe drum brakes, I somehow doubt if I will be in with a shout for FTD in that one
I am also getting the suspension sorted out with the help of our own "Guru" & Will Ker. So at least one of my cars should go reasonably well at Blyton.
As for my mildly tuned 850, with an awe inspiring 28bhp at the wheels & single leading shoe drum brakes, I somehow doubt if I will be in with a shout for FTD in that one
-
- 1275 Cooper S
- Posts: 1035
- Joined: Thu Jun 24, 2010 12:32 pm
- Location: germany
- Been thanked: 1 time
- AndyB72
- 1275 Cooper S
- Posts: 1381
- Joined: Thu Jun 24, 2010 12:44 pm
- Location: Wakefield, West Yorks
Re: 4852 MF On the rollers today
Let us know how you get on Mark, booked mine in the Wednesday before Blyton.
- rich@minispares.com
- 1275 Cooper S
- Posts: 6806
- Joined: Thu Aug 08, 2013 3:16 pm
- Been thanked: 2 times
Re: 4852 MF On the rollers today
lets hope it does better than the last mini that they had on the rollers....
I had already told the customer that the gearbox was on its way out and it needed fixing - he decided that it was more important to fit a pair of twins to it - the box then grenaded its self on the rollers- opps
I had already told the customer that the gearbox was on its way out and it needed fixing - he decided that it was more important to fit a pair of twins to it - the box then grenaded its self on the rollers- opps
- AndyB72
- 1275 Cooper S
- Posts: 1381
- Joined: Thu Jun 24, 2010 12:44 pm
- Location: Wakefield, West Yorks
-
- Site Admin
- Posts: 19843
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 2 times
- Been thanked: 5 times
Re: 4852 MF On the rollers today
Hi Andy,
I'm perfectly happy that they will have done a good job, but I'm not picking up until this evening.
I'm perfectly happy that they will have done a good job, but I'm not picking up until this evening.
-
- 998 Cooper
- Posts: 457
- Joined: Thu Jul 12, 2012 5:18 pm
Re: 4852 MF On the rollers today
6188 PW also on the rollers today.....
http://youtu.be/4xb__WHFj4M
dizzy requires a rebuild, no good after 8000 rpm it seems....ah well it can wait!
http://youtu.be/4xb__WHFj4M
dizzy requires a rebuild, no good after 8000 rpm it seems....ah well it can wait!
- Vegard
- 1275 Cooper S
- Posts: 2042
- Joined: Mon Jun 28, 2010 1:33 pm
- Location: Norway
- Contact:
-
- 998 Cooper
- Posts: 457
- Joined: Thu Jul 12, 2012 5:18 pm
-
- 998 Cooper
- Posts: 506
- Joined: Sun Jul 04, 2010 8:15 pm
-
- Site Admin
- Posts: 19843
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 2 times
- Been thanked: 5 times
Re: 4852 MF On the rollers today
Once more I am very impressed by the work done by TMS!
A real decent set of guys & Ben can't half drive a set of rollers.
For anyone in the North of England I cannot reccommend these guys highly enough.
http://www.tmsport.co.uk/
A real decent set of guys & Ben can't half drive a set of rollers.
For anyone in the North of England I cannot reccommend these guys highly enough.
http://www.tmsport.co.uk/
- AndyB72
- 1275 Cooper S
- Posts: 1381
- Joined: Thu Jun 24, 2010 12:44 pm
- Location: Wakefield, West Yorks
Re: 4852 MF On the rollers today
Like the sound of that, will see how they get on with the FZDs in a week.
-
- 1275 Cooper S
- Posts: 758
- Joined: Thu Jun 24, 2010 7:13 pm
- Location: Newcastle upon Tyne
Re: 4852 MF On the rollers today
Good to hear that TMS gets your recommendation. After hearing about them through a mutual friend, i've taken my Pug there a few times and they've always done a good job and been very helpful. I've not taken the mini there as yet but now that there RR is up and running will definitely be giving that a go too. Niall.mk1 wrote:Once more I am very impressed by the work done by TMS!
A real decent set of guys & Ben can't half drive a set of rollers.
For anyone in the North of England I cannot reccommend these guys highly enough.
http://www.tmsport.co.uk/