Anyone restoring or own a pick up ?

[Andrew1967]

Hi,

I need a few bits of information to help me with the the restoration of my pick up.

Is anyone doing one or has got one who could help

Thanks

Andrew

[Rusty old S]

Hi, is it a 60,s or 80,s pickup as they have many different features, I have a 65 waiting for restoration original but very rusty, Peter

[Andrew1967]

Hi Peter,

Split down the middle....its a '75

What I need at the moment is a measurement of the rear lamp post from the lip where the bumper bolts on to the top of the lamp post. I am replacing most of the rear end on mine and have some discrepancies in measurements on each side.

Also need to know the thickness of the spacer washers that fit between the tailgate hinges to load floor mounting point. Part number is 14A7771 - distance piece

Just for starters ......

Regards

Andrew

[IAIN]

I have an unrestored 1982 if that helps.

From the bumper lip to the top of the corner panel is 18 1/2 inches.
There is a 'L' shaped plate at the top to strengthen the hood frame hole which adds another 1/4 inch if you have that ?

[Andrew1967]

Iain, yes that probably will be of help

Any chance of getting that measurement ? If it doesn't make sense I'll post a pic of said area up !

Thanks

Andrew

[Andrew1967]

I have an unrestored 1982 if that helps.

From the bumper lip to the top of the corner panel is 18 1/2 inches.
There is a 'L' shaped plate at the top to strengthen the hood frame hole which adds another 1/4 inch if you have that ?

Hi Iain,

That'll give me something to work from.

Many thanks