Would anybody be able to suggest a firm that can recondition my heater matrix. I want to put a new one in but it turns out my one has 5 inch centres for the spigots as opposed to the more common 4 1/2 inch centres which Minispares stock off the shelf.
I presume any radiator reconditioner could do it but it is not something I have had to do before now. Cheers. Mark
Heater matrix
-
mk1coopers
- 1275 Cooper S
- Posts: 2005
- Joined: Thu Jun 24, 2010 2:14 pm
- Has thanked: 2 times
- Been thanked: 1 time
Re: Heater matrix
Give this guy a try, I've had two of the early spacing cores off him and they are both still fine (if you read the item description he says they may be available on request)
http://www.ebay.co.uk/itm/Austin-Mini-c ... 2588828e6a
http://www.ebay.co.uk/itm/Austin-Mini-c ... 2588828e6a
-
rolesyboy
- 1275 Cooper S
- Posts: 2355
- Joined: Fri Jun 25, 2010 10:57 am
- Location: Colchester, Essex
- Has thanked: 7 times
- Been thanked: 6 times
Re: Heater matrix
Sorted. Messages him and he contacted me straight away. Funnily enough somebody else. On its way as we speak. Thanks for the suggestion. Mark
Rolesyboy
-
mk1coopers
- 1275 Cooper S
- Posts: 2005
- Joined: Thu Jun 24, 2010 2:14 pm
- Has thanked: 2 times
- Been thanked: 1 time
-
sandman
- 998 Cooper
- Posts: 582
- Joined: Thu Jun 24, 2010 7:24 pm
- Location: Langhus, Norway
Re: Heater matrix
Does anyone knwo when they changed from 5" to 4.5" distance for the spigots?
Cheers,
Ed_
Ed_