Stupid & uninteligable abreviations that we use
-
- Site Admin
- Posts: 19842
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 2 times
- Been thanked: 4 times
Stupid & uninteligable abreviations that we use
We like all enthusiasts use an amazing number of abbreviations, acronyms & general gobbledygook, ad the ones that you use here.
Please try & stick to the format below so I can compile a list sometime in the future.
NOS = New Old Stock (Original parts from the 1960's, or whenever. Usually still in box & as a consequence, very expensive).
CKD - Complete Knock Down (A kit of parts to build a mini, these were exported as kits and assembled in foreign countries to avoid paying punitive rates of import duty.
Sprint = A Mini that has been chopped down usually having had between 1.5 & 2" taken out of both the body line & the window line. These were developed by Neville Trickett in the 60's and are offered by a few skilled people to this day. Nev's are still the best though!
MOWOG = Not the name of the Gorilla who tightened the flywheel bolts in the factory, but MOrris WOlsley Garages. A consortium that pre dates BMC that was founded by Lord Nuffield of Morris fame. Supplied & sourced many parts to BMC in the 50's & 60's.
Anorak = A person who is totally obsessed by details, usually to the detriment of the overall picture. This comes from the train spotter who can be seen on the end of station platforms in the UK noting down engine numbers.
Rivet Counter = See Anorak.
Purist = Someone who believes that originality is best & that modifying cars to any extent only reduces the interest & value.
Please try & stick to the format below so I can compile a list sometime in the future.
NOS = New Old Stock (Original parts from the 1960's, or whenever. Usually still in box & as a consequence, very expensive).
CKD - Complete Knock Down (A kit of parts to build a mini, these were exported as kits and assembled in foreign countries to avoid paying punitive rates of import duty.
Sprint = A Mini that has been chopped down usually having had between 1.5 & 2" taken out of both the body line & the window line. These were developed by Neville Trickett in the 60's and are offered by a few skilled people to this day. Nev's are still the best though!
MOWOG = Not the name of the Gorilla who tightened the flywheel bolts in the factory, but MOrris WOlsley Garages. A consortium that pre dates BMC that was founded by Lord Nuffield of Morris fame. Supplied & sourced many parts to BMC in the 50's & 60's.
Anorak = A person who is totally obsessed by details, usually to the detriment of the overall picture. This comes from the train spotter who can be seen on the end of station platforms in the UK noting down engine numbers.
Rivet Counter = See Anorak.
Purist = Someone who believes that originality is best & that modifying cars to any extent only reduces the interest & value.
-
- 998 Cooper
- Posts: 693
- Joined: Thu Jun 24, 2010 4:31 pm
- Location: Portsmouth Hants
Re: Stupid & uninteligable abreviations that we use
cwp= crown wheel and pinion
Axle tramp= a rally groupie
Ratchet=slightly bigger than a mouse shit
Axle tramp= a rally groupie
Ratchet=slightly bigger than a mouse shit
-
- 1275 Cooper S
- Posts: 1526
- Joined: Thu Jul 01, 2010 11:20 pm
- Location: West of Offas Dyke.
Re: Stupid & uninteligable abreviations that we use
Knockometer. Also known as Persuader or Hammer. Comes in varying sizes from 1 to 10.
One of the most adaptable and missused tools available.
One of the most adaptable and missused tools available.
- Pandora
- 1275 Cooper S
- Posts: 3105
- Joined: Thu Jun 24, 2010 8:01 pm
- Location: Dunfermline, Fife
Re: Stupid & uninteligable abreviations that we use
Acronyms on here? It's like being a work!
I like:
WA - wee adjuster (small hammer)
BBA - Bloody big adjuster (large Hammer)
I like:
WA - wee adjuster (small hammer)
BBA - Bloody big adjuster (large Hammer)
Re: Stupid & uninteligable abreviations that we use
The option to CKD is CBU, Completely Built Up.
Al
Al
Re: Stupid & uninteligable abreviations that we use
MG - Morris Garages. Who the eff dreamed that up?
-
- 1275 Cooper S
- Posts: 3180
- Joined: Fri Aug 13, 2010 5:25 am
- Location: Denmark
Re: Stupid & uninteligable abreviations that we use
WP = Wood & Pickett
JS = JanSpeed
JC = me (also see Marks post = anorak / rivit counter etc )
Jens Christian
JS = JanSpeed
JC = me (also see Marks post = anorak / rivit counter etc )
Jens Christian
- zippypinhead
- Basic 850
- Posts: 97
- Joined: Thu Jun 24, 2010 1:49 pm
- Location: North by God Royalton, Ohio, USA
Re: Stupid & uninteligable abreviations that we use
DPO*=Dumb Previous Owner
FTM=Finger Tight Murphy...I'm pretty sure that was the name of the DPO that put my '59 together...
*-DPO: try not to curse him too much... we all become one sooner or later.
FTM=Finger Tight Murphy...I'm pretty sure that was the name of the DPO that put my '59 together...
*-DPO: try not to curse him too much... we all become one sooner or later.
- vulcanbb18
- Basic 850
- Posts: 68
- Joined: Fri Sep 03, 2010 12:48 am
- Location: Brisbane, Oz
- Contact:
Re: Stupid & uninteligable abreviations that we use
Some I seem to see more often these days
NLA : No Longer Available
CWE : Cease When Exhausted
RTFM : Read The Frakking Manual
DOA : Dead On Arrival
cheers
Jacob
NLA : No Longer Available
CWE : Cease When Exhausted
RTFM : Read The Frakking Manual
DOA : Dead On Arrival
cheers
Jacob
-
- 998 Cooper
- Posts: 426
- Joined: Fri Jun 25, 2010 7:11 pm
- Location: Langley BC Canada
Re: Stupid & uninteligable abreviations that we use
How about BFH Big $%@#ing hammer
DTI Dial test indicator
RTG Rubber Tire Gantry crane
RMG Rail Mounted Gantry crane
Sorry , I work at a Container Port !
Craig
DTI Dial test indicator
RTG Rubber Tire Gantry crane
RMG Rail Mounted Gantry crane
Sorry , I work at a Container Port !
Craig
- Tedwong
- 998 Cooper
- Posts: 466
- Joined: Thu Jun 24, 2010 4:48 pm
- Location: Hong Kong
Re: Stupid & uninteligable abreviations that we use
TC - twin camshaft always , and never, never, never ever should TC be used for twin carbs, British Leyland, as they did, the total numpties.
- Pandora
- 1275 Cooper S
- Posts: 3105
- Joined: Thu Jun 24, 2010 8:01 pm
- Location: Dunfermline, Fife
Re: Stupid & uninteligable abreviations that we use
I always assumed the 'TC' Marina was an abreviation of Total crap?
- LDR209H
- 998 Cooper
- Posts: 414
- Joined: Thu Jun 24, 2010 12:46 pm
- Location: Margit,Kent
- Been thanked: 1 time
Re: Stupid & uninteligable abreviations that we use
After the sort of day I'm having DILLIGAF. (Link not for the easily offended !)
http://www.youtube.com/watch?v=WxmUKVrT0iI
And of course being in the IT trade we use the term " Sorry Mr Customer but your machine is FUCCED"
Further
Usage
Could
Corrupt
Existing
Data
http://www.youtube.com/watch?v=WxmUKVrT0iI
And of course being in the IT trade we use the term " Sorry Mr Customer but your machine is FUCCED"
Further
Usage
Could
Corrupt
Existing
Data
-
- Basic 850
- Posts: 59
- Joined: Thu Jun 24, 2010 11:38 pm
Re: Stupid & uninteligable abreviations that we use
prof peach wrote:LSD:- not the dubious substance from the 60's, but Limited Slip Differential
As English is not my first language,this third meaning of LSD from Trickeys 60s
tuning book tok me a year or so to figure.Anyone old enough to explain?
Tulka
- medwaybeat
- 850 Super
- Posts: 176
- Joined: Fri Jun 25, 2010 10:51 am
- Location: Kent
Re: Stupid & uninteligable abreviations that we use
Pounds Shillings & PenceTulka wrote:prof peach wrote:LSD:- not the dubious substance from the 60's, but Limited Slip Differential
As English is not my first language,this third meaning of LSD from Trickeys 60s
tuning book tok me a year or so to figure.Anyone old enough to explain?
Tulka
-
- 1275 Cooper S
- Posts: 3180
- Joined: Fri Aug 13, 2010 5:25 am
- Location: Denmark
Re: Stupid & uninteligable abreviations that we use
Craig wrote:How about BFH Big $%@#ing hammer
DTI Dial test indicator
RTG Rubber Tire Gantry crane
RMG Rail Mounted Gantry crane
Sorry , I work at a Container Port !
Craig
Hi Craig
any news regarding the S ?
Jens Christian
- Mike
- 850 Super
- Posts: 151
- Joined: Thu Jun 24, 2010 2:53 pm
Re: Stupid & uninteligable abreviations that we use
Regarding the definition of LSD in currency terms, the L stands for Librae, derived from Libra, the Latin for pound.
LSD = librae, solidi, denarii the original duodecimal currency.
Pound is used as in monetary terms as it relates to the value of one pound of sterling silver, hence also the term "sterling" for UK currency.
Knowledge gained from pub quizzes eh!
LSD = librae, solidi, denarii the original duodecimal currency.
Pound is used as in monetary terms as it relates to the value of one pound of sterling silver, hence also the term "sterling" for UK currency.
Knowledge gained from pub quizzes eh!
Re: Stupid & uninteligable abreviations that we use
The armed forces have always been well into acronyms. The one that sticks in my mind is KISS - keep it simple and stupid. And there is also 7P's - piss poor preperation produces piss poor performance. All good stuff.
edit - 7P's it is, not 6P's, memory probs.
edit - 7P's it is, not 6P's, memory probs.
Last edited by austinisuseless on Thu Oct 14, 2010 5:42 pm, edited 1 time in total.