exhaust mounting brackets?
-
mattyguk1
- Basic 850
- Posts: 73
- Joined: Fri Sep 03, 2010 7:44 pm
exhaust mounting brackets?
hi all,my next job on my 61 mk1 is to fit the new exhaust.the old ones been off so long i cant remember how many mounting brackets it should have! theres the two on the rear subframe,one thats square and the others a bobbin type. and im guessing theres one nearer the front? any help appreciated...
Last edited by mattyguk1 on Wed Oct 13, 2010 8:47 pm, edited 1 time in total.
-
InimiaD
- 1275 Cooper S
- Posts: 1526
- Joined: Thu Jul 01, 2010 11:20 pm
- Location: West of Offas Dyke.
Re: exhaust mounting brakets?
You guessed correctly.
The other bracket connects to a bracket which fits on the r/hand output shaft cover on the diff.
The bracket utilises 2 of the output cover setscrews.
The other bracket connects to a bracket which fits on the r/hand output shaft cover on the diff.
The bracket utilises 2 of the output cover setscrews.
-
mattyguk1
- Basic 850
- Posts: 73
- Joined: Fri Sep 03, 2010 7:44 pm
-
mattyguk1
- Basic 850
- Posts: 73
- Joined: Fri Sep 03, 2010 7:44 pm
-
mattyguk1
- Basic 850
- Posts: 73
- Joined: Fri Sep 03, 2010 7:44 pm
Re: exhaust mounting brackets?
ive scanned through the diagrams in the haynes manual and found two different ways the exhaust is fixed up front (pages 20 & 25) mine is bolted straight into the casing as page 20 so no extra bracket required to bolt to the casing. i just need to cut the bracket that came with the exhaust down to suit i guess.