Mini baby mk1 1967

[618AOG]

Superb work. My Dad's first car was a 1965 Austin Mini in Maroon B with the tan vinyl, bought when it was 3 years old and replaced in 1969 with a 1966 Mark 1 Cooper 998.

The Austin 850 has a different spec though - the UK Minis (Super Deluxe) had the vinyl lower dash rail and the oval instrument binnacle with water and oil pressure gauges. Our basic Minis had your interior but rubber floor covering, sealed rear side windows, no bumper over riders and no chrome trim in the screen rubbers.

I'm coming to France on holiday this year - would love to see these!

[Charlynsane]

Hello

yes, mine is a standard version,

She used to have rubber floor covering, but it was thorn

I replaced it with some newton carpet,

But all original species had been kept,


As you can see, another difference between UK and france, the boot badge

UK mini mk1 used to have "Austin Mini" and export models used to have "austin 850"

when we bought she was never been restored,

but as for me all mk1 used to have overiders, but deluxe, super deluxe, cooper and cooper S used to have overiders and corner bars

Send me an email before to come in france,I'm really close to Paris!

[Charlynsane]

hello

I saw a strange brand written on my seat belt buckle, "AIR FRANCE"

Is it normal?



Uploaded with ImageShack.us



Uploaded with ImageShack.us

what do you think about that guys?

[foxy52]

hello

I saw a strange brand written on my seat belt buckle, "AIR FRANCE"

Is it normal?



Uploaded with ImageShack.us



Uploaded with ImageShack.us

what do you think about that guys?

...interesting, i reckon it came off a caravelle ??

[Charlynsane]

are you serious?? lool

As for me original ones were kangol?

[Charlynsane]

Hi everybody!

Just some news from my french baby!

I repaired the broken window hinge, and

I try my car on the road for the first time!!

tested and approved! I love it..

I was like a child with his brand new toy!

and thanks to guru1071 i finally found the washer pump nut..

thank you Mr Furness!

some pics:



Uploaded with ImageShack.us

the nut previously broken and re-made by Gordon:



Uploaded with ImageShack.us

First trip on the road!!!!



Uploaded with ImageShack.us

Cheers

Charles

[Pete]

Fantastic job, always a better car if you start with a shell that good ! Those Newton moulded carpets though...yeesh. Hobson's choice I suppose.

[Charlynsane]

Dear Pete,

The newton carpets were the only choice,

When I got the car, she used to have the early rubber carpet set,

But, it was a little bit thorn, that's why I changed It!

I can't t describe the feeling, when I start the engine, what a nice and peaceful sound!

[66S]

Lovely little car, I'm sure you will have lots of fun with that one.

Al

[Charlynsane]

Anything to improve?

no missing details??

[66S]

Pull the sticker off the washer bottle, it shouldn't have one. I am also wondering if the distributor cap should be a side entry type and the spark plug caps should be Champion WC548's That is about all I can see, lovely job though.

Al

[ricardo]

Also fit the ignition panel the right way (it's upside down) and I think it shouldn't have the chrome surround (?).

[Charlynsane]

Hello

As for me she used to have WC200 spark plug cap??? no the early wc548 type.. isn't it?

And this is the good distributor cap, because it's one of the latest mk1 produced,

what do you mean for the ignition panel??

thank you

Charles

[Charlynsane]

Also fit the ignition panel the right way (it's upside down) and I think it shouldn't have the chrome surround (?).

windscreen surround??

[Charlynsane]

hello

Another picture of the car taking the sun



Uploaded with ImageShack.us

As for me the 850 mk1 used to have chrome trim arround the ignition and switches panel,

For the sticker I'm unsure, It's not difficult to pull it, as for me it was fitted on mk1/2 washer bottle,

About plug cap, I'm looking for its original wc200 caps,

Does anyone have this?

I think the ignition panel is correctly fitted, I don't understand how to fit it differently??

[66S]

hello


As for me the 850 mk1 used to have chrome trim arround the ignition and switches panel, Depend on build level, Basic, Deluxe etc

For the sticker I'm unsure, It's not difficult to pull it, as for me it was fitted on mk1/2 washer bottle, Mk1's and 2's did not have stickers

About plug cap, I'm looking for its original wc200 caps, I personally think a Mk1 should have WC548 caps, WC200's were later

Regards
Al

[ricardo]

I believe the ignition panel is upside down, you should turn it 180 degrees. I'm saying this because:

- The ignition barrel is upside down (it has a flat on one side, so can only be mounted one way... unless it was modified).
- The recesses for the choke and heater cables seem to be upside down too.

AFAIK late MK1 850 Minis didn't have chrome trim surrounds around the ignition panel.

Since yours is an export model, things may be different.

However I agree with Al, your car originally wouldn't have WC200 caps as they only appeared in the 70's.

[cpr1]

However I agree with Al, your car originally wouldn't have WC200 caps as they only appeared in the 70's.

i have seen original mk2's with WC 200 caps.

[Charlynsane]

I believe the ignition panel is upside down, you should turn it 180 degrees. I'm saying this because:

- The ignition barrel is upside down (it has a flat on one side, so can only be mounted one way... unless it was modified).
- The recesses for the choke and heater cables seem to be upside down too.

AFAIK late MK1 850 Minis didn't have chrome trim surrounds around the ignition panel.

Since yours is an export model, things may be different.

However I agree with Al, your car originally wouldn't have WC200 caps as they only appeared in the 70's.

Hello

I will wheck the ignition panel today,

For the chrome trim she used to have it before restoration,

And she also used to have wc200,

As for me wc548 was used until 67, and on late 67 they used to put wc200

Thank you

[Charlynsane]

hello everybody,

the tudor sticker has been removed,

And I put a new detail the "coopers" sticker of the air filter housing,

i found it on sommerford-mini



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us

And next time I will fit the wc200 spark plug caps,

I'm waiting for it!

Charles