Images & stories about our current projects, cars, engines & all sorts of other stuff.
bpirie1000
998 Cooper
Posts: 274 Joined: Thu Jun 24, 2010 9:17 pm
Post
by bpirie1000 » Tue Mar 01, 2011 9:14 pm
latest update for ou fine folks who need alittle motivation.
what you thinks. still need to order 10" tyres but will have a heap still to do to it but it was such a nice day had to.......
the roof rack is on wrong and the drivers door gap is wrong as i only lay it in place for the pic....
InimiaD
1275 Cooper S
Posts: 1526 Joined: Thu Jul 01, 2010 11:20 pm
Location: West of Offas Dyke.
Post
by InimiaD » Tue Mar 01, 2011 9:34 pm
Doing a fine job.
Minis just don't look right on anything but 10s. Should be on the road before long.
bpirie1000
998 Cooper
Posts: 274 Joined: Thu Jun 24, 2010 9:17 pm
Post
by bpirie1000 » Sat May 14, 2011 2:53 pm
well the latest parts arrived and are awaiting a day off to be fitted.... 10" tyres need to be fitted as above.......
Got the registration document through also after at least a years fight/ discussion with the DVLA
on the hunt for an "AUSTIN MINI" script writting badge.....OR WILL ORDER IT NEXT TIME...
also need to suss out where the hole has gone for the petrol tank strap....anyone??
thanks will get update when its all fitted....
Pandora
1275 Cooper S
Posts: 3110 Joined: Thu Jun 24, 2010 8:01 pm
Location: Dunfermline, Fife
Been thanked: 1 time
Post
by Pandora » Sat May 14, 2011 6:15 pm
I'm sure I sent the 'Austin' bit of the script to the cars last owner when he bought the car. Do you still need the rear nuber plate flap?
Al
bpirie1000
998 Cooper
Posts: 274 Joined: Thu Jun 24, 2010 9:17 pm
Post
by bpirie1000 » Sun May 15, 2011 12:04 pm
to be honest i don't know..
need to have a clear out next day off van is getting shifted from my mothers garage so need a clear out........ i think i have one somewhere... will let you know if i need it thanks again...
and car has heaps missing but thats half the fun... i am reminded...........
its getting there.slowly.....
bpirie1000
998 Cooper
Posts: 274 Joined: Thu Jun 24, 2010 9:17 pm
Post
by bpirie1000 » Tue May 17, 2011 6:59 pm
both Mk1's
couple of the van(1961) and the saloon(1962)
both don't fit in teh garage together.
which one should i be parted with... or should i look for another garage..................
Last edited by
bpirie1000 on Sat Nov 26, 2016 8:29 pm, edited 1 time in total.
coop12g295
998 Cooper
Posts: 693 Joined: Thu Jun 24, 2010 4:31 pm
Location: Portsmouth Hants
Post
by coop12g295 » Tue May 17, 2011 7:59 pm
You need a bigger garage
InimiaD
1275 Cooper S
Posts: 1526 Joined: Thu Jul 01, 2010 11:20 pm
Location: West of Offas Dyke.
Post
by InimiaD » Tue May 17, 2011 10:07 pm
Look for another garage, no question.
The saloon is coming along nicely.
bpirie1000
998 Cooper
Posts: 274 Joined: Thu Jun 24, 2010 9:17 pm
Post
by bpirie1000 » Sat Jun 18, 2011 12:28 pm
been having a play ..... not only with the car but the photo.
what you lot all think to this??
JC T ONE
1275 Cooper S
Posts: 3180 Joined: Fri Aug 13, 2010 5:25 am
Location: Denmark
Post
by JC T ONE » Sat Jun 18, 2011 12:58 pm
Like stepping back in time
very nice, and the car came out beautifull - well done .
Jens Christian
bpirie1000
998 Cooper
Posts: 274 Joined: Thu Jun 24, 2010 9:17 pm
Post
by bpirie1000 » Sat May 26, 2012 8:09 am
So it's summer time almost and still no other garage.
What would the cars be worth?
1961 smooth roof mini van.....
1962 mk1
Both original both been painted recently.
Obviously can't tell without seeing them.... But rough price?
kappa
Posts: 5 Joined: Mon Jan 28, 2013 10:46 am
Post
by kappa » Mon Feb 18, 2013 9:29 am
Great looking project from start to finish, I just want to find out what colour white is this?
1071 S
1275 Cooper S
Posts: 921 Joined: Sun Jun 27, 2010 8:44 am
Location: Southern Tablelands (Oz)
Post
by 1071 S » Mon Feb 18, 2013 11:21 am
"I notice in your engine bay picture you have the brake and clutch master cylinders the wrong way round. ie the caps go to the back.
The way you have them looks like the most obvious way I must admit...."
Having just fitted mine I was wondering if you have actually driven the car yet?... The reason that the caps are the wrong way round is that you have a brake cylinder attached to the clutch pedal and viky verka. While the cylinders are (dimensionally) the same, the layout and internals differ. So the (brake) can attached to the clutch pedal may well have clutch internals and if so it will work properly.....
You may well appreciate this but I didn't see a response to the original comment so thought I'd speak up ... just in case...???
Cheers, Ian
bpirie1000
998 Cooper
Posts: 274 Joined: Thu Jun 24, 2010 9:17 pm
Post
by bpirie1000 » Fri Jul 19, 2013 8:09 pm
Yeah all sorted...
Drives ace... Just need some time to get out in it...
Vespanation
Basic 850
Posts: 27 Joined: Wed Dec 19, 2012 6:01 am
Post
by Vespanation » Fri Jul 19, 2013 10:31 pm
Why is it that whenever anyone posts a series of photos showing the Mini that they're working on, there's always ANOTHER Mini in the background under a pile of bits?
Is one not enough? Like potato chips?
I wish I knew how to do metal work like you!
- Paul
bpirie1000
998 Cooper
Posts: 274 Joined: Thu Jun 24, 2010 9:17 pm
Post
by bpirie1000 » Sat Jul 20, 2013 8:42 pm
Always have spare parts left over when I build a car and try to make the most of them... Into another mini shape.....
Cocoon looks good but last year we had 4foot of snow up here.... Think it might not survive.....
Still got them both for now though....