I remeber reading somewhere that only certain head gaskets are compatible with the ARDEN eight port head due I believe alignment of the oil galleries.
Can anyone confirm this please, if so which types are OK or not OK.
* port head gasket compatibility
-
Richspec
- 1275 Cooper S
- Posts: 1257
- Joined: Thu Jun 24, 2010 11:26 pm
- Location: East Cumbria
- Has thanked: 2 times
- Been thanked: 4 times
Re: * port head gasket compatibility
http://minispares.com/product/Classic/E ... assic/head gasket.aspx|Back to search
thats what i used
also this available now.
http://minispares.com/product/Classic/E ... assic/head gasket.aspx|Back to search
Rich
thats what i used
also this available now.
http://minispares.com/product/Classic/E ... assic/head gasket.aspx|Back to search
Rich
Wanna see what I'm playing with? Youtube Channel
Caution
may contain 8 Ports, Xe's and VTec's, I don't do standard!
Caution
may contain 8 Ports, Xe's and VTec's, I don't do standard!-
Astro
- 998 Cooper
- Posts: 355
- Joined: Wed Nov 09, 2011 6:52 am
Re: * port head gasket compatibility
Hi,
I am running the Cometic. No problems. I was told that one can use it up to three times. Did not try it yet.
I am running the Cometic. No problems. I was told that one can use it up to three times. Did not try it yet.