Cup washers for boot lid board

[KA2S4]

Thanks to someone posting a link, I finally found someone who sells countersunk cup washers!

http://www.bresco.com/acatalog/Washers.html

Any idea which ones are correct for the pressboard boot liner on a Cooper?

I'm thinking BSF312P?

[morris cooper]

The BSF312P will do the job nicely, the screws are 1/2" or 5/8 no6 raised countersunk

[1071bob]

Thanks to someone posting a link, I finally found someone who sells countersunk cup washers!

http://www.bresco.com/acatalog/Washers.html

Any idea which ones are correct for the pressboard boot liner on a Cooper?

I'm thinking BSF312P?

Look pretty close James, the originals look like this:-

[KA2S4]

Thanks Bob, yes, that's what I thought, but I was struggling to find a supplier, as Newton just does the bigger ones that show more outside the screw head.

The ones on the bresco site look right but i wasn't sure as they don't provide any info on the size of the washers.

Anyone know how to decode the product code?

As in what does Number 8 Number 6 and number 4 mean in terms of size?

J

[66S]

Mine are black (bsf314) and so are the screws.

Al

[morris cooper]

Some screw info here, http://www.fix8.co.uk/products/Fastener ... /646154423
No 10, N08 etc refers to the screw diameter and head size.

[contour51]

Thanks to someone posting a link, I finally found someone who sells countersunk cup washers!

http://www.bresco.com/acatalog/Washers.html

Any idea which ones are correct for the pressboard boot liner on a Cooper?

I'm thinking BSF312P?

Those ones from 'Bresco' are just your normal everyday cup washers with the rolled edges.Which you can get from B&Q or Wickes .
If you are looking for something nearer to original shape and nothing a dab of silver paint would not sort.try page 10(#5177110),page 65 (#FWP906)or page123.(ZKC1607)
http://www.leacyclassics.com/parts/general-parts.html
Happy Browsing.
Gareth

[814CWE]

im sure these varied and bmc wernt over fussy what they used as i remember stripping original cars 30 yrs ago with varying types of washers on these..

if we carry on like this all the cars in the future will be identical in every way,,which surely they were not......?

[contour51]

..............and If we carry on like this no one will want to share part sourcing info.

[graham in aus]

..............and If we carry on like this no one will want to share part sourcing info.

Gareth thanks for sharing the information for everyone! you're far too honest! Maybe you should say you have a rare source of 'Ex Works' cup washers, only 16 left in the world, on E-Bay now for the highest bidder (Original BMC packaging in picture not included)....

Again...... Many Thanks for sharing