Looking for that elusive part, shout about it here.
Posts are automatically deleted after 6 months.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
Looking for a ‘Purolator’ type spin on oil filter head that has the full-sized mating face to the block. I believe these may have been used on Sprite/Midgets at some stage?
Picture for reference:
Postage to Australia or U.K. can be achieved.
Many thanks!
Last edited by sugarhiccup on Tue Mar 11, 2025 4:50 am, edited 1 time in total.
You do realize there are two versions. One places the filter further away from the block and transmission. I haven't jigged up one with sub frame in years. I believe there was a sub frame clearance issue with the longer one. I do like the short ones as they have the larger mounting area and threaded steel insert. Steve (CTR)
CooperTune wrote: ↑Fri Jan 10, 2025 2:01 pm
You do realize there are two versions. One places the filter further away from the block and transmission. I haven't jigged up one with sub frame in years. I believe there was a sub frame clearance issue with the longer one. I do like the short ones as they have the larger mounting area and threaded steel insert. Steve (CTR)
Hi Steve,
Thank you, yes I had read this in another forum thread at some stage. I appreciate you bringing this to my attention again.
I would be looking for the compatible, shorter filter head option that doesn’t have clearance issues.
One of the best modifications that you can do to your car. No more oil running down your arm and a filter change done in 2 minutes. Paint it and the cannister mid bronze and no one will even notice! Pete the Pom
