Fuel Hard Line Quick Couplers

Post any technical questions or queries here.
Post Reply
100BUR
998 Cooper
Posts: 277
Joined: Sat Aug 29, 2015 4:25 pm
Location: Cumbria, The lakes, were the roads are always quiet, and the sky is nearly always blue
Been thanked: 1 time

Fuel Hard Line Quick Couplers

Post by 100BUR »

Anybody have any experience of these Hard Line Quick couplers from HEL Performance?
Look like a good option over jubilee clips, when connecting hard line to braided hose for fuel injection.

https://auto.helperformance.com/hose-an ... k-couplers
Tupers
998 Cooper
Posts: 653
Joined: Sat May 19, 2012 5:38 pm
Location: Newton Abbot
Been thanked: 6 times

Re: Fuel Hard Line Quick Couplers

Post by Tupers »

That style union is designed to work with modern efi hardlines like the one below and replace standard plastic unions.
IMG_2425.jpeg
You could have them work if you could match the swage on a Minis hardlines but then you’re using an adapter for a system that never existed on old gear.

I think I’d go for stainless hard lines with AN bosses welded on each end or the aluminium AN hardline that uses olives and fittings.
You do not have the required permissions to view the files attached to this post.
100BUR
998 Cooper
Posts: 277
Joined: Sat Aug 29, 2015 4:25 pm
Location: Cumbria, The lakes, were the roads are always quiet, and the sky is nearly always blue
Been thanked: 1 time

Re: Fuel Hard Line Quick Couplers

Post by 100BUR »

Thanks for the reply and info
Post Reply