Anyone have a source for 73mm pistons. (not 73.5)...not having much luck finding them....
Cheers
D
73mm pistons
-
wantafaster1
- 1275 Cooper S
- Posts: 1197
- Joined: Mon Jul 05, 2010 8:40 pm
- Location: Northern Ireland
- Has thanked: 8 times
- Been thanked: 8 times
-
360gts
- 1275 Cooper S
- Posts: 2987
- Joined: Sat May 24, 2014 7:12 am
- Has thanked: 1 time
- Been thanked: 31 times
Re: 73mm pistons
Hi Dermott,
looking at my Mahle piston catalogue, these are the only 73 mm pistons they made.
Hope it helps !
R
looking at my Mahle piston catalogue, these are the only 73 mm pistons they made.
Hope it helps !
R
You do not have the required permissions to view the files attached to this post.
-
steve1071
- 1275 Cooper S
- Posts: 2176
- Joined: Sat Jun 26, 2010 7:34 pm
- Location: Leeds
- Has thanked: 7 times
- Been thanked: 11 times
Re: 73mm pistons
Had some decent ones off Keith Calver a few years back, think they were made in Oz.
-
360gts
- 1275 Cooper S
- Posts: 2987
- Joined: Sat May 24, 2014 7:12 am
- Has thanked: 1 time
- Been thanked: 31 times
Re: 73mm pistons
Yep, I had a set from a guy in Oz...Aus minis...unfortunately, he seems to have disappeared.
-
wantafaster1
- 1275 Cooper S
- Posts: 1197
- Joined: Mon Jul 05, 2010 8:40 pm
- Location: Northern Ireland
- Has thanked: 8 times
- Been thanked: 8 times
Re: 73mm pistons
In case anyone wants to know, the Calver st pistons have a slightly skinnier ring than an omega, and although die cast went quite happily to 8000 on the rev counter.
