Cooper 7in Caliper
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
4) Please always include your LOCATION
Rev 2.0 (10.09.2024)
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
4) Please always include your LOCATION
Rev 2.0 (10.09.2024)
-
Rusty old S
- 998 Cooper
- Posts: 365
- Joined: Sun Nov 28, 2010 7:39 pm
- Location: Herefordshire UK
- Has thanked: 1 time
- Been thanked: 2 times
Cooper 7in Caliper
Some how I have ended up with 2 offside(U.K. drivers side) Calipers that I resealed and fitted new pistons to before I realised so has anyone a spare N/S (kerb) spare or swap. Peter .
-
jbz23
- 998 Cooper
- Posts: 606
- Joined: Tue Sep 30, 2014 12:04 pm
- Location: Herefordshire
- Been thanked: 1 time
Re: Cooper 7in Caliper
Hi peter
this will be useful or totally un useful reply .
i do have a 7" caliper but cant remember which side , will look Friday
I'm in Herefordshire ( Kingsland )
cheers jabez
this will be useful or totally un useful reply .
i do have a 7" caliper but cant remember which side , will look Friday
I'm in Herefordshire ( Kingsland )
cheers jabez
-
indigo
- 850 Super
- Posts: 135
- Joined: Sun Jan 18, 2015 10:41 am
- Location: Down Under
Re: Cooper 7in Caliper
Are the 7 inch Cooper calipers all the same?
Early Coopers had a small pad and latter ones a larger pad, so presumably the calipers were different.
Early Coopers had a small pad and latter ones a larger pad, so presumably the calipers were different.
-
CooperTune
- 1275 Cooper S
- Posts: 1301
- Joined: Sun Sep 22, 2013 1:47 pm
- Location: Coastal VA USA
- Been thanked: 3 times
Re: Cooper 7in Caliper
I believe the 997 7-inch calipers had a different pad than 998s. I have read the 997s can be machined to accept the larger pad. I can only locate one of my 998 drive flanges. While I have yet to try it, I'm thinking about setting up a set of 8.4 drive flanges with cut down 8,4 discs thinned to 5/16, skim the pads a bit and see what I have. Steve (CTR)