Aleybars brochure
-
AndyPen
- 1275 Cooper S
- Posts: 3898
- Joined: Mon Jul 24, 2017 5:55 pm
- Location: South Wales
- Has thanked: 14 times
- Been thanked: 41 times
Re: Aleybars brochure
Great to se this Mab. Our Rally car had the FIA cage taken out to refit the early Aley bar one, and the centre stay at the rear looked further forward than many I've seen. The instructions confirm that they can be cut to size 
-
hanlminiman
- 1275 Cooper S
- Posts: 1321
- Joined: Thu Jun 24, 2010 3:12 pm
- Location: North Cotswolds, close to Prescott & Shelsley Walsh hill climb venues by Stratford upon Avon UK and
- Has thanked: 12 times
- Been thanked: 24 times
Re: Aleybars brochure
Identifying the date is a very good question as the multiple point cage is very similar to the design of the Safety Devices multipoint cage. Early 1970s s at guess ?
-
mab01uk
- 1275 Cooper S
- Posts: 8412
- Joined: Thu Jun 24, 2010 7:08 pm
- Location: S.E. England
- Has thanked: 178 times
- Been thanked: 131 times
Re: Aleybars brochure
The Aleybars brochure is not actually dated but based on the text extract posted above which mentions Aleybars were 10 years on in development from 1964 and the fact I remember getting the brochure when looking for a lighter roll bar/roll cage for my brothers Special Saloon 850 Mini around 1974, that approx. date seems to tie up.
I also have a 'Club Equipment' roll cage brochure from the around the same time in the early 1970's which I will scan and post for interest. At the time I was a Mechanical Engineering apprentice with access to a full engineering workshop with tube bending and welding gear so we had previously made our own Mini roll cage which got us through race scrutineering ok but was on the heavy side and at the time the trend in Special Saloons was for building very lightweight racing Minis...
(Mo Mendhams was probably the ultimate lightweight Mini special saloon at the time!)
Mo Mendham - Mini Racer:-
viewtopic.php?t=2967
-
AndyPen
- 1275 Cooper S
- Posts: 3898
- Joined: Mon Jul 24, 2017 5:55 pm
- Location: South Wales
- Has thanked: 14 times
- Been thanked: 41 times
Re: Aleybars brochure
I think they came in around the 67 time didn't they? I believe our first Aley cage was fitted in '69 or 70 - the T bar type. It was later replaced with an FIA type but I am restoring the T bar version for my car.
-
trevorhp
- 1275 Cooper S
- Posts: 909
- Joined: Thu Feb 17, 2011 9:38 pm
- Location: Taunton Somerset UK Formerly Kingswinford
- Has thanked: 10 times
- Been thanked: 7 times
- Contact:
Re: Aleybars brochure
All three of my cars have Aleybars T cages first one fitted 1967 didn't have Aleybars logos on clamps and look quite heavy and agricultural.
The other two fitted 1968 are T type but both with alley logo'd clamps.
Pictures in my archives verify the dates and specs.
T
The other two fitted 1968 are T type but both with alley logo'd clamps.
Pictures in my archives verify the dates and specs.
T
Last edited by trevorhp on Tue Jan 07, 2025 1:42 pm, edited 1 time in total.
"Ambition: the first step on the road to disappointment" Homer. J. Simpson
"Disappointment: the first step on the road to enlightenment" Buddha
"Enlightenment: the first step on the road to ambition" Dalai Lama
No point in hoping to go to Heaven...... I won't know anyone there.
KDK 320F
HDK 443E
DJJ 226H
TFD 47G
PKV 375
I x 1967 originally Red since 1968 Blue,Ex-Race Cooper S Bodyshell only have Commission plate as ID.
1 x chassis 007 1967 Cox GTM
"Disappointment: the first step on the road to enlightenment" Buddha
"Enlightenment: the first step on the road to ambition" Dalai Lama
No point in hoping to go to Heaven...... I won't know anyone there.
KDK 320F
HDK 443E
DJJ 226H
TFD 47G
PKV 375
I x 1967 originally Red since 1968 Blue,Ex-Race Cooper S Bodyshell only have Commission plate as ID.
1 x chassis 007 1967 Cox GTM
-
Pete
- 1275 Cooper S
- Posts: 11166
- Joined: Fri Jun 25, 2010 10:47 pm
- Has thanked: 36 times
- Been thanked: 85 times