Water pumps

Post any technical questions or queries here.
Post Reply
m1n1man1275
Basic 850
Posts: 25
Joined: Wed Aug 15, 2012 1:01 pm
Location: Essex
Has thanked: 8 times

Re: Water pumps

Post by m1n1man1275 »

Hi All, I have a cast iron pump that needs refurbishment. does anyone know if E P services are still going? i have messaged them but no response, wondered if anyone had had one done recently. failing that a kit to do it.

Cheers John.
Top
User avatar
Exminiman
1275 Cooper S
Posts: 2964
Joined: Tue Jan 17, 2017 7:59 am
Location: Berkshire UK
Has thanked: 27 times
Been thanked: 19 times

Re: Water pumps

Post by Exminiman »

indigo wrote: ↑Sun Dec 01, 2024 10:21 am In the process of fitting a new Minispares EVO pump and want to check the impeller clearance, casting flashings, etc.
Should the impeller clearance be 10 thou as per the original cast iron pumps? It definitely looks more than this.
Check the holes in the pump that the locating dowels go into are deep enough...or it wont seal to block....guess how i know...
Top
User avatar
Peter Laidler
1275 Cooper S
Posts: 6180
Joined: Sat Jul 15, 2017 5:35 pm
Location: Abingdon Oxfordshire
Has thanked: 38 times
Been thanked: 37 times

Re: Water pumps

Post by Peter Laidler »

Maybe minimk1man could contact our very own Andrew1067 about getting is original cast pump rebuilt. Andy might know someone..... If I read the previous posts correctly
Top
Post Reply

Return to “Technical Talk”