Distributor Drive Housing

Looking for that elusive part, shout about it here.
Posts are automatically deleted after 6 months.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

4) Please always include your LOCATION

Rev 2.0 (10.09.2024)
Post Reply
mark h
Posts: 24
Joined: Tue Jan 03, 2012 6:48 pm
Location: Sevenoaks Kent
Has thanked: 1 time

Distributor Drive Housing

Post by mark h »

Hi, does anyone have a distributor drive housing for sale , I assume these are all the same , however it is for a S engine.

Thanks
GraemeC
1275 Cooper S
Posts: 2266
Joined: Thu Jun 24, 2010 1:05 pm
Location: Hiding From The Dog... NW Eng
Has thanked: 1 time

Re: Distributor Drive Housing

Post by GraemeC »

I'm assuming you need the A series cast part, 12A1136 but not the pressed steel plate.
I believe there are two types, the one above has a groove for an o-ring seal on the outside of the body and is the most common, the other (earlier one) doesn't

If the 12A1136 is what you need then drop me a PM - I have a few spares
Striped shirt
850 Super
Posts: 133
Joined: Tue May 31, 2022 12:33 am

Re: Distributor Drive Housing

Post by Striped shirt »

On ebay

Item number 266790817310
mark h
Posts: 24
Joined: Tue Jan 03, 2012 6:48 pm
Location: Sevenoaks Kent
Has thanked: 1 time

Re: Distributor Drive Housing

Post by mark h »

Thanks everyone , PM sent.
Post Reply