I just found a very good and modern rolling road in Farnborough.
Surrey Rolling Road
Contact number for Chris is 07773514032
Roland
Rolling Road in Farnborough
- Rolandino
- 998 Cooper
- Posts: 715
- Joined: Sat Oct 22, 2016 11:37 pm
- Location: Berkshire
- Been thanked: 5 times
Re: Rolling Road in Farnborough
He does both, I have twing H4's and he knew how to work them, only problem he didnt have many needles. He does specialize in webers, told me numerous times that if I was running a Weber it would have taken him half the time. R
I hate electric cars !
- Exminiman
- 1275 Cooper S
- Posts: 2923
- Joined: Tue Jan 17, 2017 7:59 am
- Location: Berkshire UK
- Has thanked: 21 times
- Been thanked: 12 times
Re: Rolling Road in Farnborough
Thanks, so go equipped with a few needles if its an SU
Can i ask what he charged ?
Can i ask what he charged ?
- johnv
- 1275 Cooper S
- Posts: 964
- Joined: Sun Dec 18, 2016 12:01 pm
- Location: Surrey UK
- Has thanked: 1 time
- Been thanked: 1 time
Re: Rolling Road in Farnborough
What needles did you end up with Roland?
Mk2 1968 Cooper 998 TPL555F
Mk1 1965 Cooper 1275 BFC110C
Moke out of boxes and built NDV100F
Mk1 1965 Cooper 1275 BFC110C
Moke out of boxes and built NDV100F
- Rolandino
- 998 Cooper
- Posts: 715
- Joined: Sat Oct 22, 2016 11:37 pm
- Location: Berkshire
- Been thanked: 5 times
Re: Rolling Road in Farnborough
He charges £150 an hour and I think thats reasonable. I originally had "20" needles but they were too rich at idle and too lean at the top end. In the end we picked "CP4" I fitted them myself and wen back to check F.O.C for 15 minutes. I also changed the size of the ram pipes to shorter 1" ones. Car is now very smooth, bags of torque at 3000 rpm and idles at 800 rpm.
I hate electric cars !