Looking for one of these....or a source that sells them.
It is the white plastic type.
One of mine has gone AWOL.....or maybe Murphy was here again!
carb ball joint
-
MiNiKiN
- 1275 Cooper S
- Posts: 947
- Joined: Tue Oct 10, 2017 3:15 pm
- Location: Graz/Austria // NN1 4ST previously
- Has thanked: 18 times
- Been thanked: 9 times
Re: carb ball joint
I would start to search in a plane model shop. These are often used as part of the control rods between servo and ruder.
Or slightly different on RC-cars.
Or slightly different on RC-cars.
Yes I am a nerd: I am researching the Austrian Mini-racing scene of the 60s and 70s 
-
rnp68
- Basic 850
- Posts: 80
- Joined: Thu Aug 30, 2018 12:10 pm
- Location: Bedfordshire, in the middle
Re: carb ball joint
Plastic and metal types were used on rover, triumph and landrover carb linkages.
-
Ronnie
- 1275 Cooper S
- Posts: 1230
- Joined: Fri Jun 25, 2010 5:37 pm
- Location: N/E England Where the SAND is GOLDEN and the sea is always COLD!!
- Has thanked: 1 time
- Been thanked: 7 times
Re: carb ball joint
Try this joint the old SU > https://www.ebay.ie/itm/192630429125 these make them > https://www.moss-europe.eu/en-gb/ball-j ... pe-acb5311 for your information https://mossmotors.com/media/instructio ... 5_INST.pdf 
-
rnp68
- Basic 850
- Posts: 80
- Joined: Thu Aug 30, 2018 12:10 pm
- Location: Bedfordshire, in the middle
Re: carb ball joint
These may be suitable
You do not have the required permissions to view the files attached to this post.