I have a rattle coming from my heater, it is the direction flap lever vibrating against the front plate.
Anyone else had this?
How did you resolve the issue?
I am considering a bit of heat shrink on the lever.
Heater rattle
-
DUF2 ‘65 Elf
- 850 Super
- Posts: 164
- Joined: Fri Mar 22, 2019 8:32 pm
- Location: Tyneside
-
Peter Laidler
- 1275 Cooper S
- Posts: 6143
- Joined: Sat Jul 15, 2017 5:35 pm
- Location: Abingdon Oxfordshire
- Has thanked: 29 times
- Been thanked: 30 times
Re: Heater rattle
What sort of heater? Old metal or 68 on plastic type? Old metal one, the standard trick was to OPEN the flap, lever upwards and bend it to give it a bit more friction as I seem to remember
I think that this should be in the technical section
I think that this should be in the technical section
-
AndyPen
- 1275 Cooper S
- Posts: 3849
- Joined: Mon Jul 24, 2017 5:55 pm
- Location: South Wales
- Has thanked: 2 times
- Been thanked: 22 times
Re: Heater rattle
On ours I dismantled it and the foam 'buffer' had simply disintegrated. I used some window draft sealing foam tape and it did the trick for us 
-
100BUR
- 998 Cooper
- Posts: 269
- Joined: Sat Aug 29, 2015 4:25 pm
- Location: Cumbria, The lakes, were the roads are always quiet, and the sky is nearly always blue
Re: Heater rattle
Did a similar type of thing
Used those sticking felt pads that stop your furniture marking the floor
Used those sticking felt pads that stop your furniture marking the floor
-
DUF2 ‘65 Elf
- 850 Super
- Posts: 164
- Joined: Fri Mar 22, 2019 8:32 pm
- Location: Tyneside
Re: Heater rattle
It is the old metal heater 1965, it is not the flap that is vibrating, it is the lever that rattles in the slot.
-
Peter Laidler
- 1275 Cooper S
- Posts: 6143
- Joined: Sat Jul 15, 2017 5:35 pm
- Location: Abingdon Oxfordshire
- Has thanked: 29 times
- Been thanked: 30 times
Re: Heater rattle
Then do as I suggest. Open the flap, lever at its most extended and slightly bend it. The extra friction will stop it rattling. It's called 'the K.I.S.S. method