Wanted: Very Good 1275 Crank
A or A+.
Must be happy to post UK.
Wanted: Very Good 1275 Crank
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
4) Please always include your LOCATION
Rev 2.0 (10.09.2024)
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.
2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.
3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.
4) Please always include your LOCATION
Rev 2.0 (10.09.2024)
-
maxidave
- Basic 850
- Posts: 27
- Joined: Tue Dec 16, 2014 10:42 pm
- Location: new forest close to downton
- Been thanked: 3 times
- Contact:
Re: Wanted: Very Good 1275 Crank
I'm not sure what exactly you are looking for.I have an AEG316 crankshaft Main bearings 010" polished journals.Big ends freshly ground 010".
Flywheel taper is very clean.Crack tested and ok.One restrictor is missing in big end oil feed. A good candidate for cross drilling.The work
was carried out by Saunders Motor Works in Cadnam Hants.
Flywheel taper is very clean.Crack tested and ok.One restrictor is missing in big end oil feed. A good candidate for cross drilling.The work
was carried out by Saunders Motor Works in Cadnam Hants.
-
IB4
- Posts: 5
- Joined: Tue Oct 24, 2023 5:06 pm