Hens teeth - Tech Del Magnesium Sump Guard

Looking for that elusive part, shout about it here.
Posts are automatically deleted after 6 months.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

4) Please always include your LOCATION

Rev 2.0 (10.09.2024)
AndyPen
1275 Cooper S
Posts: 3843
Joined: Mon Jul 24, 2017 5:55 pm
Location: South Wales
Been thanked: 22 times

Re: Hens teeth - Tech Del Magnesium Sump Guard

Post by AndyPen »

GraemeC wrote: Tue Jul 16, 2024 8:33 pm Nice!
As it looks like it’s never been drilled, nevermind fitted, is it repro or NOS?
Repro - apparently about 20 were done so I am a very lucky chap indeed!
User avatar
Ronnie
1275 Cooper S
Posts: 1230
Joined: Fri Jun 25, 2010 5:37 pm
Location: N/E England Where the SAND is GOLDEN and the sea is always COLD!!
Has thanked: 1 time
Been thanked: 7 times

Re: Hens teeth - Tech Del Magnesium Sump Guard

Post by Ronnie »

AndyPen wrote: Tue Jul 16, 2024 9:39 pm
GraemeC wrote: Tue Jul 16, 2024 8:33 pm Nice!
As it looks like it’s never been drilled, nevermind fitted, is it repro or NOS?
Repro - apparently about 20 were done so I am a very lucky chap indeed!
they were made by B•M•C Competitions Dept. Ltd is it mag or alloy?
This is the Tech Del > https://web.archive.org/web/20160914120 ... pguard.jpg
AndyPen
1275 Cooper S
Posts: 3843
Joined: Mon Jul 24, 2017 5:55 pm
Location: South Wales
Been thanked: 22 times

Re: Hens teeth - Tech Del Magnesium Sump Guard

Post by AndyPen »

Ronnie wrote: Wed Jul 17, 2024 10:22 am
AndyPen wrote: Tue Jul 16, 2024 9:39 pm
GraemeC wrote: Tue Jul 16, 2024 8:33 pm Nice!
As it looks like it’s never been drilled, nevermind fitted, is it repro or NOS?
Repro - apparently about 20 were done so I am a very lucky chap indeed!
they were made by B•M•C Competitions Dept. Ltd is it mag or alloy?
This is the Tech Del > https://web.archive.org/web/20160914120 ... pguard.jpg

Alloy I believe Ronnie, I don't think our original one survived as we have most other bits and can't find it. The copy looks spot on and thanks for the link to the pic, compares very well indeed, and you've confirmed the fixing locations too ;-)

Shot from the same angle for comparison...


front view for comparision.jpeg
You do not have the required permissions to view the files attached to this post.
Post Reply