Hydro to dry ( temporary )

[spoon.450]

A mate with a hydro car wants to temporarily convert to dry to improve handling and the way the car sits. He intends storing the hydro units and any other associated removed parts to refit at a later date. Although different he would ideally like to keep the standard subframes, radius arms and front top arms on the car as it is currently a complete car. Any suggestions regarding the most practical way of doing this…….advice on what parts may be readily available etc would be much appreciated. Thanks Dave

[mab01uk]

There is some useful info by Keith Calver on what to expect when mixing/matching Hydrolastic and dry suspension parts in the link below.
Suspension - Converting from wet to dry:-
https://www.calverst.com/technical-info ... et-to-dry/

[spoon.450]

Thanks for the info / link. I’ll pass it on .