Whilst researching head stud steel grades, came across this document. https://leylandaustralia.com.au/index_h ... 0Studs.pdf
Quite interesting
Head studs
-
rnp68
- Basic 850
- Posts: 80
- Joined: Thu Aug 30, 2018 12:10 pm
- Location: Bedfordshire, in the middle
-
Exminiman
- 1275 Cooper S
- Posts: 2906
- Joined: Tue Jan 17, 2017 7:59 am
- Location: Berkshire UK
- Has thanked: 21 times
- Been thanked: 9 times
Re: Head studs
Thanks for posting, an interesting study, wonder what the sample size was, couldn’t see it in the notes.
I doubt if any Mini parts supplier would have the ability to test the studs, so would rely on the supplier to inspect before shipping, if indeed the supplier would have the ability………I suppose the mini supplier could insist on inspection certification……maybe some do?
Where as ATP would be mad not to have a thorough inspection regime in place, as they sell reliability.
For the above reasons, personally I would only ever use ATP, they are expensive, but I feel they are cheap insurance
I doubt if any Mini parts supplier would have the ability to test the studs, so would rely on the supplier to inspect before shipping, if indeed the supplier would have the ability………I suppose the mini supplier could insist on inspection certification……maybe some do?
Where as ATP would be mad not to have a thorough inspection regime in place, as they sell reliability.
For the above reasons, personally I would only ever use ATP, they are expensive, but I feel they are cheap insurance