MPI short engine in early mini

Post any technical questions or queries here.
Post Reply
swifty
1275 Cooper S
Posts: 1533
Joined: Thu Jun 24, 2010 11:19 pm
Location: Essex
Been thanked: 6 times

MPI short engine in early mini

Post by swifty »

If I were to use a MPI short engine in a say early mini is there a way to create a spark for it WITHOUT using a ECU at all . Obviously I know there isn’t a distributor drive in the block . Is there a solution out there so this could be done and still connect to a mk1 loom … Shirley
1963 austin Cooper s mk1 1071
1966 Austin Cooper s mk1 1275
1968 Austin Cooper mk2 998
1962 Morris mini super 850
Porsche 997 turbo S
Ford transit van 280s.

I am from Essex
mini_surfari
1275 Cooper S
Posts: 759
Joined: Fri Jun 25, 2010 10:26 am
Location: South West
Been thanked: 3 times

Re: MPI short engine in early mini

Post by mini_surfari »

Use a JKD 16v head with a dizzy up top :lol:

Hopefully someone’s got something more helpful than me!
User avatar
medwaybeat
850 Super
Posts: 176
Joined: Fri Jun 25, 2010 10:51 am
Location: Kent

Re: MPI short engine in early mini

Post by medwaybeat »

irlmin
998 Cooper
Posts: 363
Joined: Wed Apr 20, 2011 6:51 pm
Location: Cork Ireland
Has thanked: 11 times
Been thanked: 4 times

Re: MPI short engine in early mini

Post by irlmin »

Specialist Components supply a kit as below taken from their website .G


Specialist Components understands that car projects are exactly that – projects! We decided that we would create an upgradeable management system for the classic Mini. With a high specification and high value the Delta 400 allows the customer to map the ignition of their Mini electronically, with the option to upgrade this to our 5/7 Port or 16v injection system later.

The Delta 400 upgradable management system contains everything needed to replace archaic, unreliable and inaccurate distributor ignition with a modern programmable mapped electronic ignition system. A specific kit is available for Mini engines using our trigger wheel kit. The D400 system can easily be used in full 3D operation with either Weber DCOE or Dellorto DHLA carburetors (with a custom throttle position sensor kit) or with a MAP sensor.

The package contains:
• SC Delta 400 ECU
• Complete wiring harness
• USB CAN Interface
• Crankshaft position sensor
• Coil (bracket + leads)

Now supplied with high quality Magnecor ignition leads.

PLEASE NOTE: These kits are not suitable for cars fitted with Automatic transmission.
swifty
1275 Cooper S
Posts: 1533
Joined: Thu Jun 24, 2010 11:19 pm
Location: Essex
Been thanked: 6 times

Re: MPI short engine in early mini

Post by swifty »

Medway thanks , thats exactly the type of solution I was hoping for . Can you imagine trying to find one of the distributors though .
Irmin thanks for the reply but the question was without using a ECU .
1963 austin Cooper s mk1 1071
1966 Austin Cooper s mk1 1275
1968 Austin Cooper mk2 998
1962 Morris mini super 850
Porsche 997 turbo S
Ford transit van 280s.

I am from Essex
irlmin
998 Cooper
Posts: 363
Joined: Wed Apr 20, 2011 6:51 pm
Location: Cork Ireland
Has thanked: 11 times
Been thanked: 4 times

Re: MPI short engine in early mini

Post by irlmin »

How did I miss that ? and it in Capitals as well :D
User avatar
medwaybeat
850 Super
Posts: 176
Joined: Fri Jun 25, 2010 10:51 am
Location: Kent

Re: MPI short engine in early mini

Post by medwaybeat »

Hi Swifty, I would guess that the dizzy is standard and it's only where it's driven from that has changed.
Post Reply