1965 Cooper S inlet manifold adaptors
-
richardACS
- 998 Cooper
- Posts: 703
- Joined: Tue Jun 19, 2018 2:43 pm
- Location: Hertfordshire
- Has thanked: 20 times
- Been thanked: 5 times
1965 Cooper S inlet manifold adaptors
Have been endeavouring to set up the inlet manifold for the brake servo union and PC valve union and the brake servo non return valve. Do these look correct?
You do not have the required permissions to view the files attached to this post.
-
Peter Laidler
- 1275 Cooper S
- Posts: 6146
- Joined: Sat Jul 15, 2017 5:35 pm
- Location: Abingdon Oxfordshire
- Has thanked: 29 times
- Been thanked: 30 times
Re: 1965 Cooper S inlet manifold adaptors
Looks OK to me. Can I make a suggestion Richard. Leave off the strut that connects the gulp valve to the manifold. It is not required and makes it a pain to remove the air cleaners housing without scratching it. Simply leave the gulp valve attached by the rubber hose and it'll bend forwards as you need to remove the cleaner box.
-
richardACS
- 998 Cooper
- Posts: 703
- Joined: Tue Jun 19, 2018 2:43 pm
- Location: Hertfordshire
- Has thanked: 20 times
- Been thanked: 5 times
Re: 1965 Cooper S inlet manifold adaptors
Thanks for suggestion Peter, but will be fitting the twin 'Cooper' air filters...