1965 S Brake line to Servo Route

richardACS · Post by **richardACS** » Sat Dec 09, 2023 5:50 pm

Help please with images for the route of the brake pipe to the servo and the servo to the front subframe.

Thanks in advance...

LarryLebel · Post by **LarryLebel** » Mon Dec 11, 2023 11:38 pm

I put a servo in my Traveller. The picture shows the brake line routing I used based on a 67 Cooper S setup.

LarryLebel · Post by **LarryLebel** » Mon Dec 11, 2023 11:45 pm

P.S. I'm not sure how I managed to attach the picture. It's a Christmas miracle!

rogerotto66s · Post by **rogerotto66s** » Tue Dec 12, 2023 3:59 am

Here is 1966 Austin Cooper S.

IMG_0878.jpeg

LarryLebel · Post by **LarryLebel** » Tue Dec 12, 2023 3:04 pm

Here's another picture (hopefully) of the completed engine bay to show the route of the lines around the air intake pipe. The clip separating the pipes (painted black) shown in Roger's S is just visible. The servo is mounted higher up than on my Cooper S because on the shell I restored there were existing mounting holes on the inner fender.

richardACS · Post by **richardACS** » Tue Dec 19, 2023 9:34 am

rogerotto66s wrote: ↑Tue Dec 12, 2023 3:59 am Here is 1966 Austin Cooper S.

IMG_0878.jpeg

Thanks to all for images - this seems to be the closest to what I believe it should be for a 65....

mk1 · Post by **mk1** » Tue Dec 19, 2023 10:41 am

speedwell106.jpg

This is pretty much spot on for a 65 S.

richardACS · Post by **richardACS** » Tue Dec 19, 2023 12:17 pm

mk1 wrote: ↑Tue Dec 19, 2023 10:41 am speedwell106.jpg

This is pretty much spot on for a 65 S.

That's an interesting engine shot! and appears to have the same non fresh air hose looping over the servo - mine also ends just ahead of the bulkhead with an internal gauze cover.. Also looks to be Tweed Grey! (as is mine).

Thank you!

mk1 · Post by **mk1** » Tue Dec 19, 2023 1:05 pm

Correct on all counts, pic was taken in Jan 66, it's one of the Speedwell press shots of my ex ex-demonstrator LGW 123D.

richardACS · Post by **richardACS** » Wed Dec 20, 2023 9:48 am

Do you have any photos of the car Mark?

Would it have been based on a standard Cooper or S just intrigued by the position of the fuse/regulator box? (can't quite make it out)...

mk1 · Post by **mk1** » Wed Dec 20, 2023 10:15 am

Yes, I have lots of pictures of it. I don't think any show the regulator box though.

Post by **Andrew1967** » Fri Dec 22, 2023 9:19 pm

I can probably supply some photos of the pipes I made for HOY.

According to Simon Wheatcroft they are very accurate, copied from some original photos he sent me.

Much the same as Marks

richardACS · Post by **richardACS** » Sat Dec 23, 2023 10:51 am

Andrew1967 wrote: ↑Fri Dec 22, 2023 9:19 pm I can probably supply some photos of the pipes I made for HOY.

According to Simon Wheatcroft they are very accurate, copied from some original photos he sent me.

Much the same as Marks

That would be much appreciated - many thanks...

Post by **Andrew1967** » Sat Dec 23, 2023 12:23 pm

Pics just sent Richard.

Let me know if you don't receive them

richardACS · Post by **richardACS** » Sun Dec 31, 2023 2:34 pm

Thank you Andrew for the images they have been most useful especially from so many angles. Another milestone achieved...

Post by **Andrew1967** » Sun Dec 31, 2023 4:57 pm

Glad to help out whenever I can Richard

mk1-forum.net

1965 S Brake line to Servo Route

1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route

Re: 1965 S Brake line to Servo Route