Hi,
Dont suppose anyone has a good photo of the wiring behind the speedo on a Super Deluxe? Got an autosparks wiring loom but am struggling to comprehend the wiring for the voltage regular/fuel gauge/ temp sensor.
Many thanks Dylan
Wiring- Super Deluxe
-
Austinmini1966
- Basic 850
- Posts: 38
- Joined: Tue Apr 28, 2020 11:01 pm
- Location: Buckinghamshire
-
Peter Laidler
- 1275 Cooper S
- Posts: 6146
- Joined: Sat Jul 15, 2017 5:35 pm
- Location: Abingdon Oxfordshire
- Has thanked: 29 times
- Been thanked: 30 times
Re: Wiring- Super Deluxe
Can do better than that. The electrical section of the workshop manual has a good colour coded schematic drawing of the wiring loom and all of the connections all clearly laid out.
An Autosparks loom will have the correct colour coded wiring that are shown in the workshop manual. Follow that and it'll take an hour at most
An Autosparks loom will have the correct colour coded wiring that are shown in the workshop manual. Follow that and it'll take an hour at most
-
Dearg1275
- 1275 Cooper S
- Posts: 1501
- Joined: Mon May 11, 2015 4:16 pm
- Location: Scotland
Re: Wiring- Super Deluxe
Hi Dylan,
On the cars with the voltage stabilisers for the instruments there was a separate single lead that ran from the stabiliser to the fuel gauge supplying the current. Auto sparks don’t supply that with the loom. Perhaps that helps?
D
On the cars with the voltage stabilisers for the instruments there was a separate single lead that ran from the stabiliser to the fuel gauge supplying the current. Auto sparks don’t supply that with the loom. Perhaps that helps?
D
-
Austinmini1966
- Basic 850
- Posts: 38
- Joined: Tue Apr 28, 2020 11:01 pm
- Location: Buckinghamshire
Re: Wiring- Super Deluxe
Thank you very much….i think this could be exactly why I can’t work it out!