Early Front Subframe - Tower Bolt Torque

[GraemeC]

Is there a specified value for the torque on the 4 (2 each side) subframe tower bolts? If so - what is it?!
Haynes doesn't state anything but proper manuals might.

[austinisuseless]

Think it is nothing much, about 5lbs ft or something silly. Anything more and the bolts will just start digging a hole into the bulkhead. Just tighten the bolts square to the tab so you can raise it to lock the bolts off.

[mk1]

Yup, I just nip them up & bend the tags up.

[ivor badger]

Since the thread is 3/8" unf, try around 42 ft lbs.