Ha, ha, ha. . . New pants please!
-
- Site Admin
- Posts: 19842
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 2 times
- Been thanked: 5 times
Ha, ha, ha. . . New pants please!
If that is the original factory mould for a BMC rosette I'm John Cooper.
http://www.ebay.co.uk/itm/GENUINE-BMC-B ... 46024df0a7
Whoever made that flimsy ash tray by taking an impression from an original has absolutely NO IDEA what an industrial quality GRP mould looks like!
The lunatic is asking £4000 as an opening bid.
You could make one just like that for about £40!
It'll be fun to see if any fool actually bids on it.
Also its amusing how it was found in a closed down factory, as the original factory that made them is still in business & makes all the GRP crap for Blackpool Illuminations. I can only imagine that the closed down factory referred to closed down because it was making very poor quality GRP moulds that wouldn't last more than a dozen impressions.
M
http://www.ebay.co.uk/itm/GENUINE-BMC-B ... 46024df0a7
Whoever made that flimsy ash tray by taking an impression from an original has absolutely NO IDEA what an industrial quality GRP mould looks like!
The lunatic is asking £4000 as an opening bid.
You could make one just like that for about £40!
It'll be fun to see if any fool actually bids on it.
Also its amusing how it was found in a closed down factory, as the original factory that made them is still in business & makes all the GRP crap for Blackpool Illuminations. I can only imagine that the closed down factory referred to closed down because it was making very poor quality GRP moulds that wouldn't last more than a dozen impressions.
M
-
- 998 Cooper
- Posts: 712
- Joined: Fri Jun 25, 2010 1:24 pm
- Location: in my workshop
Re: Ha, ha, ha. . . New pants please!
sombody should bid on it and not pay and give him negative feedback....
for my sins,i own a 1957 wolsleley 1500
-
- 998 Cooper
- Posts: 281
- Joined: Fri Jun 25, 2010 11:26 am
-
- 1275 Cooper S
- Posts: 1040
- Joined: Fri Oct 08, 2010 3:57 pm
- Location: Banbridge, Co Down, N. Ireland
- Contact:
Re: Ha, ha, ha. . . New pants please!
The zero key on his computer must be sticking slightly there!! lol
Ian Campbell
-
- 1275 Cooper S
- Posts: 2158
- Joined: Sat Jun 26, 2010 7:34 pm
- Location: Leeds
- Has thanked: 3 times
- Been thanked: 2 times
Re: Ha, ha, ha. . . New pants please!
Surely an original mould would not have been fibre glass? £200 packing and private feedback!
-
- Site Admin
- Posts: 19842
- Joined: Thu Jun 24, 2010 11:30 am
- Location: Away with the Faries
- Has thanked: 2 times
- Been thanked: 5 times
Re: Ha, ha, ha. . . New pants please!
I think the original mould would probably have been fibreglass, but it would have been at least 1 - 2" thick with some sort of framework, to help peel & release it.
An industrial GRP mould IS NOT an insubstantial bit of kit.
M
An industrial GRP mould IS NOT an insubstantial bit of kit.
M
-
- 1275 Cooper S
- Posts: 2109
- Joined: Thu Jun 24, 2010 7:47 pm
Re: Ha, ha, ha. . . New pants please!
haha
technically thats not a 'master mould' its a 'negative copy' thats been made using the painted version
i doubt you would get more than a couple of versions from it before the thing started to break up, never mind the complete lack of a sacrificial edge for trimming back.
a proper master mould would be 1/4 - 1/2 thick, with reinforcing wooden battens glassed into the mould, with a thick rim for the trimming knife to run round - it would be so heavy that one preson would struggle to lift it.
you could make a 'negative copy' like that for about 40 quid (as mark says), i guess the other 3960 quid would cover the rent on 'ye olde garage unit' to get your back story right..........
edit - bit of a posting race between me and mark there!
technically thats not a 'master mould' its a 'negative copy' thats been made using the painted version
i doubt you would get more than a couple of versions from it before the thing started to break up, never mind the complete lack of a sacrificial edge for trimming back.
a proper master mould would be 1/4 - 1/2 thick, with reinforcing wooden battens glassed into the mould, with a thick rim for the trimming knife to run round - it would be so heavy that one preson would struggle to lift it.
you could make a 'negative copy' like that for about 40 quid (as mark says), i guess the other 3960 quid would cover the rent on 'ye olde garage unit' to get your back story right..........
edit - bit of a posting race between me and mark there!
please note, these are my own, individual sales, nothing whatsoever to do with my employer, minispares
- pad4
- 1275 Cooper S
- Posts: 1089
- Joined: Sun Jun 27, 2010 5:57 am
- Location: Darwen, Lancashireee
Re: Ha, ha, ha. . . New pants please!
I'll also go with this - we make loads of grp master tooling, usually with a polished gelcoat surface - never just raw grp - its to bloody thin any way
crap
Pad4
crap
Pad4
- Pandora
- 1275 Cooper S
- Posts: 3105
- Joined: Thu Jun 24, 2010 8:01 pm
- Location: Dunfermline, Fife
Re: Ha, ha, ha. . . New pants please!
and all the dams have fallen off. first pull out of it and the edge will break up.
Imagine the size of the BMC bag though!
Imagine the size of the BMC bag though!
-
- 998 Cooper
- Posts: 260
- Joined: Mon Jul 05, 2010 2:44 pm
Re: Ha, ha, ha. . . New pants please!
towners wrote:Question - Who owns the BMC name is it Nanjing?
BMC may refer to:
In business and organizations
Beard Miller Company, a US public accounting firm
BioMed Central, a UK-based scientific publisher
BMC Trading AG, a Swiss bicycle products manufacturer and sponsor of professional cycling
BMC (Turkey), a Turkish vehicle manufacturer
Boston Micromachines Corporation, a manufacturer of microelectromechanical deformable mirrors
Brega Marketing Company a Libyan company for marketing petroleum and related products
Brihan Mumbai Mahanagarpalika - (Municipal Corporation of Greater Mumbai (formerly Bombay Municipal Corporation)
British Motor Corporation, a UK vehicle company
British Motor Corporation (Australia), the Australian arm of the British Motor Corporation
British Mountaineering Council
Bulk mail center
In computing
BMC Software, a provider of enterprise management software and services
Baseboard management controller, a microcontroller on computer motherboards
Biphase mark code, a type of encoding for binary data streams
Bounded model checking, an algorithm used for verification of hardware designs
In education
Bangalore Medical College
Belfast Metropolitan College
Blue Mountain College, a college in Blue Mountain, Mississippi, USA
Bolan Medical College
Brown Mackie College
Bryn Mawr College, a college in Bryn Mawr, Pennsylvania
Other uses
Barrie Molson Centre, an arena in Barrie, Ontario, Canada
Bone mineral content, a parameter in bone density testing
Bordel militaire de campagne or bordels mobiles de campagne, a mobile brothel for French soldiers
Boston Medical Center, a hospital in the United States
Brevard Music Center, a music festival in North Carolina
Bulk moulding compound, a thermosetting polymer
British Museum catalogue
Black middle class
BMC Racing Team, a professional cycling team
Chief Boatswain's Mate (abbreviated as BMC), a class of Chief Petty Officer in the US Navy
Body–mind centering, a form of body psychotherapy developed by Bonnie Bainbridge-Cohen