aeg 648 dry sump cam?

General Chat with an emphasis on BMC Minis & Other iconic cars of the 1960's.
Post Reply
mniwagn
850 Super
Posts: 116
Joined: Sat Jul 10, 2010 5:24 am
Location: California USA

aeg 648 dry sump cam?

Post by mniwagn »

have a spare whats it worth?
mk1
Site Admin
Posts: 19843
Joined: Thu Jun 24, 2010 11:30 am
Location: Away with the Faries
Has thanked: 2 times
Been thanked: 5 times

Re: aeg 648 dry sump cam?

Post by mk1 »

Depends totally on condition like any other s/h cam.
mniwagn
850 Super
Posts: 116
Joined: Sat Jul 10, 2010 5:24 am
Location: California USA

Re: aeg 648 dry sump cam?

Post by mniwagn »

Its installed so not nos but its never been used/fired
mk1
Site Admin
Posts: 19843
Joined: Thu Jun 24, 2010 11:30 am
Location: Away with the Faries
Has thanked: 2 times
Been thanked: 5 times

Re: aeg 648 dry sump cam?

Post by mk1 »

A dry sump version is not usually worth more than a standard version. So I would estimate the value of yours as between £100 & £150 as it is original factory has not been run.
littler
998 Cooper
Posts: 293
Joined: Thu Jun 24, 2010 7:11 pm

Re: aeg 648 dry sump cam?

Post by littler »

what did the drysump setup look like Mark?
ive heard of it lots of times as being something like an MG oil pump but never seen it!
anyone got any pics?
User avatar
sandman
998 Cooper
Posts: 582
Joined: Thu Jun 24, 2010 7:24 pm
Location: Langhus, Norway

Re: aeg 648 dry sump cam?

Post by sandman »

AFAIK,

It looks just like a regulare cam, but it got one additional "gear" like the one driving the dizzy - this is located on the other end of the cam... where the mech. fuel-pump was located.
Cheers,

Ed_
User avatar
sandman
998 Cooper
Posts: 582
Joined: Thu Jun 24, 2010 7:24 pm
Location: Langhus, Norway

Re: aeg 648 dry sump cam?

Post by sandman »

Oh... sorry - seems like i missunderstood you... I thought you asked about the cam drive for the dry-sump pump.
Cheers,

Ed_
User avatar
sandman
998 Cooper
Posts: 582
Joined: Thu Jun 24, 2010 7:24 pm
Location: Langhus, Norway

Re: aeg 648 dry sump cam?

Post by sandman »

Many moons ago... I found these photos of an FJ engine that was for sale somewhere...

Image
Image
Image

Dry sump pump is clearly visible in the last photo.... other show how the oil was routed with pipes to the "front" of the block..
Cheers,

Ed_
Post Reply