Cone Gearbox 2nd Gear

Looking for that elusive part, shout about it here.
Forum rules
1) The advertising of or soliciting for VIN tags, log books or any other vehicle identification documentation without it's associated vehicle is expressly forbidden.

2) If I consider any postings in this section to violate either the spirit or word of this simple request I reserve the right to delete any posts without prior warning or explanation.

3) Please try to avoid starting discussions or commenting on peoples Wanted listings. It clutters the section up & makes it difficult to see what people are actually asking for. Please feel free to start discussions in the appropriate section.

Rev 1.2 (16.09.20)
Post Reply
User avatar
Spider
Posts: 4368
Joined: Mon May 07, 2012 6:10 am
Location: Big Red, Australia

Cone Gearbox 2nd Gear

Post by Spider »

Hey all,

I'm after a 2nd gear for a good friend, it's from an early Cone type Gearbox, complete gear part number 22A90, or just the Gear without the Cone, part number 2A3690 would be OK. Before NOS but will consider a good used items too. Cone itself isn't too important as we can make them OK.

Thanks !
Chris
Top
User avatar
whistler
Posts: 673
Joined: Sat Nov 05, 2016 6:02 pm
Location: Cardiff

Re: Cone Gearbox 2nd Gear

Post by whistler »

Message John Guess at Guessworks.
Top
cmiller
Posts: 117
Joined: Sat Dec 20, 2014 9:26 pm
Location: Seattle Washington USA

Re: Cone Gearbox 2nd Gear

Post by cmiller »

What is the tooth count for the gear you are looking for? I may be able to help. I have a ton of this stuff but am located in the States.
If I have the correct gear it is yours for the cost of shipping.

Chris Miller
Top
User avatar
Spider
Posts: 4368
Joined: Mon May 07, 2012 6:10 am
Location: Big Red, Australia

Re: Cone Gearbox 2nd Gear

Post by Spider »

cmiller wrote: ↑Tue Jan 10, 2023 4:21 am What is the tooth count for the gear you are looking for? I may be able to help. I have a ton of this stuff but am located in the States.
If I have the correct gear it is yours for the cost of shipping.

Chris Miller
Thanks for your reply and your most generous offer here.

Location isn't an issue and happy to pay for the gear and postage.

The Gear has 28 teeth.

Image

Cheers
Top
cmiller
Posts: 117
Joined: Sat Dec 20, 2014 9:26 pm
Location: Seattle Washington USA

Re: Cone Gearbox 2nd Gear

Post by cmiller »

Thanks for this Spider. I am going down to where the parts are this Saturday and will check for you. Since you say you can install new brass cones I will definately check to see if the engagement teeth are in good usable shape. Wish me luck.

Chris Miller
Top
User avatar
Spider
Posts: 4368
Joined: Mon May 07, 2012 6:10 am
Location: Big Red, Australia

Re: Cone Gearbox 2nd Gear

Post by Spider »

Thanks Chris,

I wish us all luck !!!

Cheers
Chris K
Top
cmiller
Posts: 117
Joined: Sat Dec 20, 2014 9:26 pm
Location: Seattle Washington USA

Re: Cone Gearbox 2nd Gear

Post by cmiller »

PM sent to you.

Chris Miller
Top
Post Reply

Return to “Wanted”