1966 Mini Van (the rustiest one yet)
-
- 1275 Cooper S
- Posts: 1354
- Joined: Tue Jan 24, 2012 4:47 pm
- Location: Belgium
Re: 1966 Mini Van (the rustiest one yet)
You're right about the grille positioning - one of the many things amiss with that Pickup in Minworld recently (along with seats, carpets, saloon fresh air heater, mouldings on the wings, door cards, wing mirrors, bright strip round the windscreen etc....). Patina...?
You do not have the required permissions to view the files attached to this post.
-
- 998 Cooper
- Posts: 410
- Joined: Fri May 13, 2016 9:07 pm
- Location: Cheshire
Re: 1966 Mini Van (the rustiest one yet)
I havent been slacking, im getting the prep done in my spare time, and getting on pretty well. A while off paint yet as i want to make sure everything is straight and fitting nice.
Started on the most time consuming job, getting both sides nice and straight after the lower repairs were done.
The whole car is in high build primer now so alot of guide coating, blocking, filling if needed and more blocking.
Should have some more updates soon.
Started on the most time consuming job, getting both sides nice and straight after the lower repairs were done.
The whole car is in high build primer now so alot of guide coating, blocking, filling if needed and more blocking.
Should have some more updates soon.
-
- 1275 Cooper S
- Posts: 2606
- Joined: Wed Oct 19, 2011 5:07 pm
- Location: Southern England
- Been thanked: 4 times
Re: 1966 Mini Van (the rustiest one yet)
I thought that was a Willow Green colour coat! As you say, it is a lot of wok getting the sides looking dead straight.
It is coming on VERY well
It is coming on VERY well
- Andrew1967
- 1275 Cooper S
- Posts: 7903
- Joined: Thu Jun 24, 2010 6:35 pm
- Location: Usually in my garage on the east coast of Norfolk, UK
- Been thanked: 1 time
Re: 1966 Mini Van (the rustiest one yet)
My first thoughts was that it was top coat colour too !!
This is a fantastic build thread .. credit to you Harry.
The grille insert issue was one I was very careful about when I did LHJ 38P. It wasn't difficult to get right, just a bit time consuming to linish and file the insert to sit at the correct depth, then braze all around.
This is a fantastic build thread .. credit to you Harry.
The grille insert issue was one I was very careful about when I did LHJ 38P. It wasn't difficult to get right, just a bit time consuming to linish and file the insert to sit at the correct depth, then braze all around.
-
- 998 Cooper
- Posts: 410
- Joined: Fri May 13, 2016 9:07 pm
- Location: Cheshire
Re: 1966 Mini Van (the rustiest one yet)
Thanks for the positive comments, unfortunately the primer will not be the colour the paint goes onto as i will be putting MIPA epoxy over the top once everything is finished.
I copied the grille from the M-machine one, i know it is not 100% correct but i am going to have to go with it now, the problem is in a year (or two) i hope to have the pickup and van sat next to each other in paint. And maybe some parts on it also.
I will be buying a bulk batch of willow green max mayer paint so i dont get colour shade issues between the two cars.
I copied the grille from the M-machine one, i know it is not 100% correct but i am going to have to go with it now, the problem is in a year (or two) i hope to have the pickup and van sat next to each other in paint. And maybe some parts on it also.
I will be buying a bulk batch of willow green max mayer paint so i dont get colour shade issues between the two cars.
- Pandora
- 1275 Cooper S
- Posts: 3105
- Joined: Thu Jun 24, 2010 8:01 pm
- Location: Dunfermline, Fife
Re: 1966 Mini Van (the rustiest one yet)
I'm just looking at the progress you've made in 7 months, and feel more than a little ashamed given that since I got mine back I've made NO progress on it
It's looking amazing though
Al
It's looking amazing though
Al
-
- 998 Cooper
- Posts: 654
- Joined: Tue Mar 31, 2020 8:44 pm
- Location: The Netherlands
- Been thanked: 3 times
Re: 1966 Mini Van (the rustiest one yet)
I was thinking exactly the same! Incredible progress and makes me feel a little bad about how much progress I've been making on mine...
Of course I know what a dipstick is, you get called something often enough you look it up!
-
- Basic 850
- Posts: 35
- Joined: Thu Feb 26, 2015 6:48 pm
- Location: Wiltshire
Re: 1966 Mini Van (the rustiest one yet)
What an incredible build in such short time. Amazing work.
Grant
Grant
-
- Basic 850
- Posts: 27
- Joined: Sat Feb 05, 2022 7:15 pm
- Location: Just outside Edinburgh
-
- 998 Cooper
- Posts: 410
- Joined: Fri May 13, 2016 9:07 pm
- Location: Cheshire
Re: 1966 Mini Van (the rustiest one yet)
Hi Dan,
Unfortunately not in paint yet, i have done a huge amount of bodywork to the van to get it as straight and looking lovely, but it is taking me alot of time. I will get there though!
Unfortunately not in paint yet, i have done a huge amount of bodywork to the van to get it as straight and looking lovely, but it is taking me alot of time. I will get there though!