NEOPRENE sheeting/sealing material
- Peter Laidler
- 1275 Cooper S
- Posts: 6128
- Joined: Sat Jul 15, 2017 5:35 pm
- Location: Abingdon Oxfordshire
- Has thanked: 25 times
- Been thanked: 29 times
NEOPRENE sheeting/sealing material
If you're looking for neoprene sheeting material, any size and thickness, get onto HGL supplies on Ebay. Brilliant service. I have used 3mm and 1mm for plenty of jobs on mt Cooper S and Rover Cooper sport over the past many months. 3mm for fuel tank support and upright etc etc and 1mm for between fuel tank straps and tank. Also as a layer between the master cylinder bracket and bulkhead and bracket on the other side too. Generally everything like that has a neoprene seal now
-
- 1275 Cooper S
- Posts: 3835
- Joined: Mon Jul 24, 2017 5:55 pm
- Location: South Wales
- Been thanked: 21 times
Re: NEOPRENE sheeting/sealing material
I've done the same with the bulkhead plates, but grabbed the offcuts from a garage roof being done down the road as I'm a stingy old git The offcuts are about 2ft wide and 13 or more yards long... so watch out for any flat roofing going on in your area.
Edit: they have some useful stuff on eBay
Edit: they have some useful stuff on eBay