Yipee!

[cookie1071]

My 1070 block back from Southam this weekend after a freshen up. Can't wait to get it back in the car and put a few miles on her before the winter sets in. If all goes well, the car will then be out on my rally on 10th March , although not with me in it as that would be silly cos i'd know where to go!

Here's the car earlier this year in all its glory. Not to everyones taste i'm sure and a bit rougher around the edges than it looks in the pic. but all mine since 1990.



£1 if you can guess where the pic. was taken.

Niall.
PS And yes i do need to sort the suspension out!

[COOPERMAN]

.Now i do like that , very nice, my kind of mini, lovely job.

[SMOKE GREY]

Me like very much

[Etienne B.]

I do really like your Mini, Niall

[mk1]

A very sweet little min! With a 1070 fitted too

My favourite combo!

[sr001]

Not looking too dissimilar to mine Niall. This will also be out on the Borders rally. Engine is now in and its MOT'd. The first run down to Combe last month revealed a small head gasket issue, but will soon be back out to finish the running in before the worst of the winter sets in. I must admit I had a "Yipee" moment when i rolled it down the road for the first following the resto.

I settled for a 1293cc in the end when consisdering the size of crew (large) and the gradiants Niall tends to send you up!

Stephen

[cookie1071]

Cheers for the positive comments guys although as i indicated it's not as nice in the flesh!

Stephen - great to see RFO and another period modified 850 back on the road!

Shall we form Team Clipper Blue for the event?

Niall.

[sr001]

Now that sounds like a plan Who will be taking the hot seat?

although as i indicated it's not as nice in the flesh!

Don't be too hard on yourself, it looked pretty good at Bulee earlier this year

[cookie1071]

Now that sounds like a plan Who will be taking the hot seat?

Not sure yet, depends how things pan out with friends/family but yeh, the two together would look pretty nifty.

Don't be too hard on yourself, it looked pretty good at Bulee earlier this year

It's not bad from the top down it's from the bottom up that's the problem! Nevermind, if it was super tidy it wouldnt get used much.

What have you done/are doing about things like seats, harnesses, cage & sumpguard in RFO?

Tempted to put a guard on mine and already have three point harnesses just undecided on whether to fit a cage , mainly as i intend to make SVE (aka Orangebox the 3rd) my RR car in the long-term.

Niall.

[251 ENG]

Hello Stephen

How,s my engine doing ?

[sr001]

How,s my engine doing ?

I think its a case of machined by a pro built by an idiot, although I havn't had a a issue in the past. In all seriousness, I will get it back together soon and get it down to the Southam rollers next month all being well.

What have you done/are doing about things like seats, harnesses, cage & sumpguard in RFO?

I've fitted a cage, std safety devices with my own additions, a pair of britax harnesses and a pair of restalls will soon replace the std seats. Still not sure on the sump gaurd. TBH i have tried to keep the car looking std and like a early '60 car where possible, only making modification to suit the desired use of road rallies, hill climb and general fun.

[cookie1071]

I've fitted a cage, std safety devices with my own additions, a pair of britax harnesses and a pair of restalls will soon replace the std seats. Still not sure on the sump gaurd. TBH i have tried to keep the car looking std and like a early '60 car where possible, only making modification to suit the desired use of road rallies, hill climb and general fun.

Nice one , have you got any other shots of the car you can show us and what spec is the 1293??

[sr001]

Nice one , have you got any other shots of the car you can show us and what spec is the 1293??

I really need to sort out my photo's, but i do have a few.

The engine will hopefully prove quite useful. Nothing is breaking the mould and I will be happy if it just proves reliable.

In brief: Worked crank (wedge, backdrill, xdrill etc), forged pistons on balanced a+ rods, 286ish cam, ultra light flywheel ass, ap clutch, s/c box, twin hs4's on a steel manifold, reverse megaphone system, plus a whole host other bits I brought when feeling flush. The only standard part is the head because I had promised the wife a holiday, and for a easy life and all that. I expect once its been on the rollers it will be screaming out for a decent head. Lets see what santa brings...

[cookie1071]

Crikey Stephen that really does look and sound like the kiddy and much cleaner underneath than my old banger!

I have lots of questions but they're probably more easily answered with the car in front of us - any chance of a sneak preview if i'm passing your way??

Niall.

PS That floor start's not too close the exhaust is it??

[sr001]

I have lots of questions but they're probably more easily answered with the car in front of us - any chance of a sneak preview if i'm passing your way??

Niall.

PS That floor start's not too close the exhaust is it??

I'm sure I could accomodate you.

Although its it looks tight in the photo there is comfortable clearance. I was planning on skidding the bulge in the floor to prevent any damage on rough ground, but I think its well enough out the way.

[cookie1071]

I'm sure I could accomodate you.

Although its it looks tight in the photo there is comfortable clearance. I was planning on skidding the bulge in the floor to prevent any damage on rough ground, but I think its well enough out the way.

OK cool and yeh just thought i'd ask about the starter as i had a bit of a bonfire in that area a few years ago!

I see the Essex 12-car didn't get revived for this year - pity as i'd lined up Stewart Lawrence to nav. for me in PX.

Niall.

[cookie1071]

Well, the block is now back in my possession (tks to Surfblue for collecting ) and ready to go back on the box, which i'm hoping will be on Saturday.

Need some good quality 1.3 roller rockers to go on the unit though - any recommendations (heard the Minisport items are OK)??

Niall.

[814CWE]

My 1070 block back from Southam this weekend after a freshen up. Can't wait to get it back in the car and put a few miles on her before the winter sets in. If all goes well, the car will then be out on my rally on 10th March , although not with me in it as that would be silly cos i'd know where to go!

Here's the car earlier this year in all its glory. Not to everyones taste i'm sure and a bit rougher around the edges than it looks in the pic. but all mine since 1990.



£1 if you can guess where the pic. was taken.

Niall.
PS And yes i do need to sort the suspension out!

hey,,ive got a car with a similar reg number---

wanna see it? lol

[cookie1071]

er yeh - another Guildford reg yeh?

[newtune]

Hello Stephen

How,s my engine doing ?

Hows my engine doing ! ? and the sprint ?