Hi. Does this look to be correct for a mini?
Seems about 1/4 inch too long when fitted to my S block.
Total length approx 2.166” [2-1/8” nominal]
Distributor drive housing dimensions
-
iain1967s
- 1275 Cooper S
- Posts: 1839
- Joined: Sat Jun 10, 2017 12:46 am
- Location: Cambridge, MA, USA
- Been thanked: 4 times
Distributor drive housing dimensions
You do not have the required permissions to view the files attached to this post.
-
Spider
- 1275 Cooper S
- Posts: 4775
- Joined: Mon May 07, 2012 6:10 am
- Location: Big Red, Australia
- Has thanked: 59 times
- Been thanked: 15 times
Re: Distributor drive housing dimensions
Just looking at it, it appears too long.
It also doesn't have the groove for the O Ring.
Might be an early one or for a different series of engine.
It also doesn't have the groove for the O Ring.
Might be an early one or for a different series of engine.
-
Dearg1275
- 1275 Cooper S
- Posts: 1501
- Joined: Mon May 11, 2015 4:16 pm
- Location: Scotland
Re: Distributor drive housing dimensions
Early mini one (without ring) 2.156” overall and 1.660” for”tube”.
D
D
-
iain1967s
- 1275 Cooper S
- Posts: 1839
- Joined: Sat Jun 10, 2017 12:46 am
- Location: Cambridge, MA, USA
- Been thanked: 4 times
Re: Distributor drive housing dimensions
Thanks. Looking at photos on eBay, it appears to be B-series for MGB etc.