Mini Super Power - CCC - David Vizard
-
- 1275 Cooper S
- Posts: 1190
- Joined: Mon Jul 05, 2010 8:40 pm
- Location: Northern Ireland
- Has thanked: 4 times
- Been thanked: 4 times
- Costafortune
- 1275 Cooper S
- Posts: 2026
- Joined: Thu Feb 16, 2017 9:26 am
- Location: Sheffield On Thames
- Has thanked: 13 times
- Been thanked: 23 times
Re: Mini Super Power - CCC - David Vizard
When you think a standard 1.3 Corolla engine did 90 bhp in the early 90's. Flexible, perky, idles like a sewing machine and 40 mpg.
A Series tuning is very much the law of diminishing returns. Really, a solid flywheel 80 bhp from a 1300 is as far as you want to go. Such a Mini would wind round to a real 100 mph and break 60 in 9 seconds. Fast enough.
A Series tuning is very much the law of diminishing returns. Really, a solid flywheel 80 bhp from a 1300 is as far as you want to go. Such a Mini would wind round to a real 100 mph and break 60 in 9 seconds. Fast enough.
-
- 998 Cooper
- Posts: 452
- Joined: Tue May 27, 2014 7:19 pm
- Location: Dorking , Surrey
Re: Mini Super Power - CCC - David Vizard
Anybody on here run a offset ground 1300 crank with S rods , is it a successful conversion to gain the extra stroke ?
8662 FN Austin Mini
Yes I know it’s not original
My wife says I don’t listen to her or something like that !
Yes I know it’s not original
My wife says I don’t listen to her or something like that !
- smithyrc30
- 1275 Cooper S
- Posts: 1383
- Joined: Thu Feb 05, 2015 8:40 am
Re: Mini Super Power - CCC - David Vizard
Yes it gets the extra stroke BUT the counter weights are not big enough for the revision even when they are 'wedged'. They are "generally speaking" rough as buggery when run higher up the speed range and the standard crank dampers shag out in no time. Which in turn leads to shagged mains. The extra stroke leads to higher piston speeds so the rings don't seal as well and wear out faster.roymck wrote:Anybody on here run a offset ground 1300 crank with S rods , is it a successful conversion to gain the extra stroke ?
Ok for a competition motor which gets torn down regularly and gets treated to new shells and a damper change.
For a road car you are better off with the standard stroke or a shorter stroke and a bigger bore, it will rev higher for the same piston speed, the crank is much stiffer so you can rev it higher for longer and it won't feel like a Ford Dover engine while it is doing it.
- mab01uk
- 1275 Cooper S
- Posts: 8294
- Joined: Thu Jun 24, 2010 7:08 pm
- Location: S.E. England
- Has thanked: 119 times
- Been thanked: 78 times
Re: Mini Super Power - CCC - David Vizard
Having a big sort out of my archive and found this update which may be of interest...so have scanned it and added below.