QH DRIVESHAFT COUPLINGS

[wolseley 1000]

Hi,
as it is nearly impossible to get a good pair of QL5000
I am considering to get the repros from MS.
Does anyone have experience with these?

http://www.minispares.com/Product.aspx? ... sku=0&tc=1

[jaapio1984]

Rookie question....QL5000 are "original" ones ?

Jaapio

[SMOKE GREY]

Hi,
as it is nearly impossible to get a good pair of QL5000
I am considering to get the repros from MS.
Does anyone have experience with these?

http://www.minispares.com/Product.aspx? ... sku=0&tc=1

FELL TO BITS AFTER 1200 MILE, AND TWO ROAD RALLIES

[mk1]

Original QH5000's are brilliant, but very hard to find now. I have never used the MS alternative so can't comment on them.

[ace01]

Hi,
as it is nearly impossible to get a good pair of QL5000
I am considering to get the repros from MS.
Does anyone have experience with these?

http://www.minispares.com/Product.aspx? ... sku=0&tc=1

FELL TO BITS AFTER 1200 MILE, AND TWO ROAD RALLIES

I agree. A pair severely damaged after Minis to Monte. The little needle rollers were shattered.

[sandman]

I've seen some ine QH packaging on e-bay... are these originals or repros?

[YMJ]

just don't buy the ones with grease nipple holes in them. My MS ones have been fine after much assurance from Richie and Keith Calver and about 5 hours LSD race time

[skorstensfejeren]

I found a NOS set of QH 5000 a few month ago. I just used it on my 1071 rebuild, so it can be done....

[skorstensfejeren]

Here´s one too....

http://global.ebay.com/Mini-Early-Mini- ... 22383/item

[Mini4Ever]

There is also a variant with the nylon bits in metal as used on the Inno's