Just had an attempt to fit the new vinyl covering with evo stick disappointing result uneven finish etc
Whats the secret to this job please
Fitting vinyl covering to dash rails
-
WNX700H
- 850 Super
- Posts: 165
- Joined: Wed Jun 30, 2010 11:40 pm
-
mini13
- Basic 850
- Posts: 81
- Joined: Mon Jun 28, 2010 6:31 pm
Re: Fitting vinyl covering to dash rails
what glue did you use?
you need a strong glue, one that really stinks! iirc timebond works ok.
http://www.bostik.co.uk/diy/product/evo-stik/Timebond/7
you need a strong glue, one that really stinks! iirc timebond works ok.
http://www.bostik.co.uk/diy/product/evo-stik/Timebond/7
-
Ronnie
- 1275 Cooper S
- Posts: 1266
- Joined: Fri Jun 25, 2010 5:37 pm
- Location: N/E England Where the SAND is GOLDEN and the sea is always COLD!!
- Has thanked: 6 times
- Been thanked: 19 times
Re: Fitting vinyl covering to dash rails
3M used to market Fast Tack (it may be quoted as just a number now) its function was aimed at car upholstery owing to the high internal temperatures that can be achieved (even in the UK) inside a car in summer.