Mark 2 Minis were like that in 1980!rich@minispares.com wrote:that's not bad at all
Mk2 Rebuild.
-
Costafortune
- 1275 Cooper S
- Posts: 2016
- Joined: Thu Feb 16, 2017 9:26 am
- Location: Sheffield On Thames
- Has thanked: 9 times
- Been thanked: 17 times
Re: Mk2 Rebuild.
-
Wilder1992
- Posts: 21
- Joined: Fri Sep 02, 2016 10:30 am
Re: Mk2 Rebuild.
On further inspection, parts of the heel board and floor sections were affected by rust more than expected, I wanted it to be neat and done properly so I decided the best course of action was to buy a full floor from M machine and install. Yes it's probably overkill but I figured that would be the best way.
Floor out, Toe board ends repaired and rust proofed.
image by Jack Wilder, on Flickr
New floor pan installed and aligned with subframes and measurements, then held in place with clamps and skin pins, ready to be plug welded into place.
image by Jack Wilder, on Flickr
image by Jack Wilder, on Flickr
Floor out, Toe board ends repaired and rust proofed.
image by Jack Wilder, on FlickrNew floor pan installed and aligned with subframes and measurements, then held in place with clamps and skin pins, ready to be plug welded into place.
image by Jack Wilder, on Flickrimage by Jack Wilder, on Flickr