Custom Foam Filled Race Tank - Recommendations?

GTM71 · Post by **GTM71** » Tue Oct 24, 2017 4:20 pm

Hi All
Going to need to get my fuel tank for the GTM made soon, I have a drawing done just need someone to make it, Can I get some names of companies you would recommend please?
thanks
Simon

mk1 · Post by **mk1** » Tue Oct 24, 2017 4:27 pm

Contact Roy @ ralloy.

http://www.ralloy.com/

Not fast, but good.

Post by **rich@minispares.com** » Tue Oct 24, 2017 4:54 pm

ROY!

he is the man

Lakeland997 · Post by **Lakeland997** » Tue Oct 24, 2017 10:36 pm

Concept Racing did this one for us from a drawing in about 10 days.
If it’s alloy it’s better to strap it down as mountings welded on may fracture over time.

Post by **rich@minispares.com** » Wed Oct 25, 2017 8:54 am

what did they charge you for it?

its a really neat looking tank, that's for sure

GTM71 · Post by **GTM71** » Wed Oct 25, 2017 9:35 am

Yes I was wondering that. Also, is it foam filled? Mine has to be taller to fit in the hole I created, but otherwise very similar.

5portsrock · Post by **5portsrock** » Wed Oct 25, 2017 4:21 pm

Bob at Concept racing is awesome...give him a sketch and he will make it.

http://www.conceptracing.co.uk/

Lakeland997 · Post by **Lakeland997** » Wed Oct 25, 2017 8:09 pm

Yes it’s foam filled. I think it was about £550 with the VDO sender and stainless steel straps. It has an outlet and return for the fuel injection.
It’s rectangular except for a taper at the bottom front edge to clear where the subframe starts rising.

Post by **goff** » Mon Oct 30, 2017 9:15 pm

GTM71 if you are close to the A1 in Nottinghamshire , Between Tuxford and Ollerton Give Jim a call on www.alloyracingfabrications.com
01636822708
NG23 6LX

Very helpful made me Aluminium mini van tank and front radiator for my Mini Jem

Post by **Vegard** » Tue Oct 31, 2017 9:01 am

What about Endaf Owens. If you're in Wales.

https://www.facebook.com/owensfabrication/

turbocox · Post by **turbocox** » Tue Oct 31, 2017 9:41 am

Endaf, Owens fabrication, is a good shout as he has a Cox chassis in his workshop at the moment.

Julian Harber · Post by **Julian Harber** » Fri Nov 03, 2017 12:16 am

The workmanship and build quality from Concept racing is superb and they are not over priced - when it comes to safety cell tanks they know what they are doing - we call Bob "The Alloy Guru" his welding is excellent that's why F1 items can be in his workshop but he will never disclose who's they are !

mk1-forum.net

Custom Foam Filled Race Tank - Recommendations?

Custom Foam Filled Race Tank - Recommendations?

Re: Custom Foam Filled Race Tank - Recommendations?

Re: Custom Foam Filled Race Tank - Recommendations?

Re: Custom Foam Filled Race Tank - Recommendations?

Re: Custom Foam Filled Race Tank - Recommendations?

Re: Custom Foam Filled Race Tank - Recommendations?

Re: Custom Foam Filled Race Tank - Recommendations?

Re: Custom Foam Filled Race Tank - Recommendations?

Re: Custom Foam Filled Race Tank - Recommendations?

Re: Custom Foam Filled Race Tank - Recommendations?

Re: Custom Foam Filled Race Tank - Recommendations?

Re: Custom Foam Filled Race Tank - Recommendations?